Installation manual

8 en | Assembly and Installation Washer Kit

F.01U.206.249 | 2.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.

4.2.2 Connecting the UPH Pan/Tilt

To connect the pump of the washer (item 1, below) to the UPH (item 2) refer to the following

illustration and table. Close the cover door when the connections are complete.

Additional Connections for HAC-WAS30-50

4.2.3 Installing the Pump (HAC-WAS20-05, HAC-WAS20-50)

Fill the tank with water and insert it in the metal cage. Insert the pump in the tank and tighten

the cap. The system is ready to be powered.

Pump board

(connector CN4)

UPH Board

CMD 01

GND C1

Pump board

(connector CN4)

UPH Board

ALM AL1

ALM/G COM