Technical data

Fig.1-3: Plug orientation at the IndraControl VAC 30.2
While the connector is being screwed on, a relay activates the
STOP
push button. This ensures that the IndraControl VCH 08.1 is
supplied with power. To ensure the optimal connection of the con‐
tacts and to achieve the specified degree of protection, screw the
knurled nut until the rubber seal is completely covered and the end
position is reached.
During the starting up of the IndraControl VCH 08.1 and during routine opera‐
tion,
regularly check all three positions of the enabling device on both sides for
correct functioning.
The device may only be started up and connected by appropriately qualified
staff.
The device and systems manufacturer provides further details about the start-
up in their documentation.
4/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
System Presentation