Technical data

2 Important Instructions for Use
2.1 Appropriate Use
2.1.1 Introduction
Rexroth
products are developed and manufactured in accordance with the lat‐
est technologies. They are tested prior to delivery for their safe operation and
reliability.
The products may only be used appropriately. If the use is inappropriate, sit‐
uations may arise which can cause both physical damage as well as damage
to property.
As a manufacturer, Rexroth is unable to undertake any guarantee,
liability
or payment of compensation pertaining to damages caused
by the inappropriate use of its products. The user is solely respon‐
sible for all risks resulting from the products which are not used as
intended.
Before you use Bosch Rexroth products, the following requirements must be
fulfilled in order to guarantee the appropriate use of the products:
● Anyone
handling a Rexroth product in any way must read and understand
the corresponding safety instructions as well as the instructions on ap‐
propriate use.
● Hardware products must remain in their original state, in other words, no
modifications regarding their design may occur. Software products may
not be decompiled and their source codes may not be modified.
● Damaged or faulty products may not to be installed or put into operation.
● It must to be ensured that the products are installed according to the
specifications whcih are set out in the documentation.
2.1.2 Areas of Use and Application
The hand-held terminalIndraControl VCH 08.1 is a PC-based operation and
visualization device that can also complete control functions depending on the
application and configuration.
The hand-held terminalIndraControl VCH 08.1 may only be used
with
the accessories and add-ons which are specified in this docu‐
mentation. Components which are not explicitly named may neither
be added nor connected. The same applies to cables and wires.
Operation my only be carried out in the specified configurations and
combinations of the components and with the software and firm‐
ware stated in the corresponding functional descriptions.
The hand-held terminalIndraControl
VCH 08.1 has been developed for use in
control tasks.
Typical areas of application for the hand-held terminalIndraControl VCH 08.1:
● Handling systems and assembly systems,
● packaging and food processing machines,
● printing and paper processing machines, and
● machine tools.
Project Planning Manual | Rexroth IndraControl VCH 08.1 Electric Drives
and Controls
| Bosch Rexroth AG 5/80
Important Instructions for Use