Technical data

6 Display and Operating Components
6.1 Operating Elements
6.1.1 Overview
Information
from almost all of the operating elements is transmitted to the con‐
troller in the form of a real time protocol and is available there via a function
block. For further information, please see the chapter 9.3 "Evaluating the Com‐
mands of the Operating Elements" on page 63.
6.1.2 Casing of the IndraControl VAC 08.1
Overview
An enabling switch with two actuators for the enabling switch is integrated in
the IndraControl VCH 08.1 which when appropriately wired and evaluated an
be used in safety circuits up to category 4 (EN 954-1).
Fig.6-1: Front view of the IndraControl VAC 08.1
Project Planning Manual | Rexroth IndraControl VCH 08.1 Electric Drives
and Controls
| Bosch Rexroth AG 27/80
Display and Operating Components