Technical data

7.3.2 Pin Assignment of the IndraControl VAC 30.2
Fig.7-5: Pin assignment of the IndraControl VAC 30.2 connection module
Pin Signal name
X1.1 Pin1 24 VDC connection module VAC30
X1.1 Pin2 0 V
X1.1 Pin3 24 VDC hand operated terminal
X1.2 Pin1 24 VDC connection module VAC30
X1.2 Pin2 0 V
X1.2 Pin3 24 VDC hand operated terminal
X1.1 Pin4 terminal connected IN
X1.2 Pin4 terminal connected OUT
X2.1 Pin1 STOP push button 1 IN
X2.1 Pin2 STOP push button 1 OUT
X2.1 Pin3 STOP push button 2 IN
X2.1 Pin4 STOP push button 2 OUT
X2.2 Pin1 enabling device 1 IN
X2.2 Pin2 enabling device 1 OUT
X2.2 Pin3 enabling device 2 IN
X2.2 Pin4 enabling device 2 OUT
Fig.7-6: Pin assignment of the IndraControl VAC 30.2 connection module
The IndraControl VAC 30.1, which is the version preceding the connection
module IndraControl VAC 30.2, is not equipped with a separate voltage supply
and an alarm contact. Therefore, the pins 3 and 4 of the X1.1 and X1.2 terminal
blocks are not available on the IndraControl VAC 30.1. All pins available on the
VAC 30.1 are compatible with the pins of the IndraControl VAC 30.2.
Project Planning Manual | Rexroth IndraControl VCH 08.1 Electric Drives
and Controls
| Bosch Rexroth AG 43/80
Pin Assignments of the IndraControl VCH 08.1