Technical data

8 Maintenance and Installation
8.1 General Information
The
embedded terminals are maintenance free. However, some components
are subject to wear and must be replaced.
Include the following measures in the maintenance schedule:
● Clean
the screen surface at least once a week with an anti-static cloth or
window cleaning agent that contains denatured alcohol.
CAUTION
Disolving of the keypad surface and the display seal through contact
with solvents!
Do not use any solvents (e. g. paint thinner)!
● At
least once a year, check all plug and terminal connections for the correct
tightness and against damage.
Check that cables are not broken or crushed. Replace damaged parts
immediately.
8.2 LCD Display
A
fading backlight leads to a progressive deterioration of the LCD display's
readability. This means that a backlight exchange is necessary. For further in‐
formation please contact the Bosch Rexroth Service.
8.3 Maintenance of the IndraControl VCH 08.1
The IndraControl VCH 08.1is designed for the use in an industrial environment.
It does not need any special maintenance.
We recommend users to keep the device away from humidity, oils and emul‐
sions.
If a particular degree of fouling is achieved - from the ergonomic point of view
- the IndraControl VCH 08.1 should be cleaned with a smooth, dry and fuzz-
free cloth to restore e. g. the full grip.
Project Planning Manual | Rexroth IndraControl VCH 08.1 Electric Drives
and Controls
| Bosch Rexroth AG 55/80
Maintenance and Installation
Maintenance