Technical data

9.2.3 Customer Application
The
customer application can be started in the Start-up Application via the
"Run" button, see chapter 9.2.2 "Start-up Application " on page 59. Alternatively
the customer application is automatically started after five seconds.
9.2.4 Service Dialog
The customer application can be started in the Start-up Application via the
"Run" button, see chapter 9.2.2 "Start-up Application " on page 59. You can
configure the network and the hardware in the Service dialog.
After calling up the Service dialog a password request is displayed, see fig. 9-4
"Entering the password" on page 60. The standard password is "+-+-". Please
only enter the password using the keypad.
Fig.9-4: Entering the password
If the password is entered correctly then the Service dialog is displayed, see
fig. 9-5 "Service dialog" on page 61.
60/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
Software