Technical data

Switch-on Actions for Restart (Start-up)
You will find the "start-up" register in the "Config tool", see chapter 9.5.3 "
Configuration Tool (Config Tool)" on page 66.
Fig.9-13: Dialog for restart
The setting options on this register are being prepared and are currently un‐
available.
System Update
You will find the "system image" register in the "Config tool", see chapter 9.5.3
" Configuration Tool (Config Tool)" on page 66.
Fig.9-14: Dialog for image update
This register serves the loading of an image file into the IndraControl
VCH 08.1. You can actualize the operating system with a newly loaded image
file.
The image file may be copied into any desired directory except the
\FlashDrv directory.
It is mandatory to execute "check file" before every image update.
The "tmp"
directory may be considered as a sensible storage place
for the image file.
Here, a new WinCE image file can be selected in the file-selecting dialog.
68/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
Software
Image File