Technical data

Fig.6-10: IndraDyn S rotating plugs
Options A, B, L or R
Motors with frame size MSK100 are available with determined output directions
only.
Option Description
A Output connector in direction of side A
B Output connector in direction of side B
L Power connector to the left
R Power connector to the right
Fig.6-11: IndraDyn S connectors with fixed output direction
Fig.6-12: Type code column
In order to connect the machine elements to be driven to the motor drive shafts,
the following options are available for all IndraDyn S motors:
Option Design Detail
G Plain shaft With frontal centering hole with ”DS” thread
according to DIN 332, Part 2, Edition 05.83
P
Shaft with keyway
1)
1) Keyway according to DIN 6885, Sheet 1, ed. 08.68. For details, refer to the dimen-
sion sheets.
Fig.6-13: IndraDyn S drive shafts
IndraDyn S motors are balanced with a key. The pertinent key is
not included in the scope of delivery.
Fig.6-14: Type code column
Drive shaft
Holding brake
Project Planning Manual | Rexroth IndraDyn S Electric Drives
and Controls
| Bosch Rexroth AG 103/194
Type Codes