Technical data

2 Important Directions for Use
2.1 Appropriate Use
2.1.1 Introduction
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operating safety and reliability.
WARNING
Personal injury and property damage caused by inappropriate use of
the products!
The products may only be used in the manner that is defined as appropriate. If
they are used in an inappropriate manner, then situations can develop that may
lead to property damage or injury to personnel.
Rexroth, as manufacturer, is not liable for any damages resulting
from inappropriate use. In such cases, the guarantee and the right
to payment of damages resulting from inappropriate use are forfei-
ted. The user alone carries all responsibility of the risks.
Before using Rexroth products, make sure that all the pre-requisites for appro-
priate use of the products are satisfied:
● Personnel that in any way, shape or form uses our products must first read
and understand the relevant safety instructions and be familiar with ap-
propriate use.
● If the product takes the form of hardware, then they must remain in their
original state, in other words, no structural changes are permitted. It is not
permitted to decompile software products or alter source codes.
● Do not mount damaged or faulty products or use them in operation.
● Make sure that the products have been installed in the manner described
in the relevant documentation.
2.1.2 Areas of Use and Application
Motors of the MSK line made by Rexroth are designed to be used as rotary
main and servo drives, as linear drives, or as kit motors. Typical applications
are:
● Machine tools
● Printing and paper processing machines
● Packaging and foodstuff machines
● Metal-forming machine tools
To ensure an application-specific use, the motors are available with differing
drive power and different interfaces.
Control and monitoring of motors may require additional sensors and actors.
MSK may only be used with the accessories and parts specified in
this document. If a component has not been specifically named,
then it may not be either mounted or connected. The same applies
to cables and lines.
Operation is only permitted in the specified configurations and com-
binations of components using the software and firmware as speci-
fied in the relevant function descriptions.
Project Planning Manual | Rexroth IndraDyn S Electric Drives
and Controls
| Bosch Rexroth AG 5/194
Important Directions for Use