Technical data

Every connected drive controller has to be programmed before starting it up,
making it possible for the motor to execute the specific functions of an appli-
cation.
MSK may only be operated under the assembly, installation and ambient con-
ditions as described here (temperature, system of protection, humidity, EMC
requirements, etc.) and in the position specified.
2.2 Inappropriate Use
Using MSK outside of the above-referenced areas of application or under op-
erating conditions other than described in the document and the technical data
specified is defined as "inappropriate use".
MSK may not be used if
● they are subject to operating conditions that do not meet the above speci-
fied ambient conditions. This includes, for example, operation under wa-
ter, in the case of extreme temperature fluctuations or extremely high
maximum temperatures or if
● Rexroth has not specifically released them for that intended purpose.
Please note the specifications outlined in the general safety instructions!
6/194 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDyn S | Project Planning Manual
Important Directions for Use