Technical data

7.3.6 Assembly
Fan unit LEM-AB-116N
Fig.7-12: Assembly of fan unit LEM-AB-116N-xx-NNNN
Mounting procedure
1. Insert the terminal block D into the groove of the end shield.
2. Insert the fan unit as far as (A2) it will go onto the end shield.
3. Tighten the fastening screws A. Tightening torque 4 Nm.
4. Electrical connection according to the connection diagram.
134/194 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDyn S | Project Planning Manual
Accessories and Options