Technical data

10 Handling, Transport and Storage
10.1 Supplied Condition
10.1.1 General
On delivery, the IndraDyn S motors are packed in cardboard boxes or crates.
Packing units on pallets are secured by retaining straps.
WARNING
Injuries due to uncontrolled movement of the retaining straps when cut-
ting!
⇒ Maintain a sufficient distance and carefully cut the retaining straps.
On delivery from the factory, the motor drive shaft and the connectors have
protective sleeves. Remove the protective sleeves just before assembly.
10.1.2 Inspection at the Factory
All IndraDyn S motors undergo the following inspections:
● High-voltage test according to DIN EN 60034-1/02/99
● Insulation resistance according to EN 60204-1/1.92, Section 20.3.
● Ground conductor connection according to EN 60204-1/1.92, Section
20.3.
● Test of winding resistance
● Concentricity and position tolerances of shaft end and fastening flange
according to DIN 42955/12.81
● Axial eccentricity of the flange face to the shaft according to DIN 42955/
12.81.
● Axial eccentricity of the centering shoulder to the shaft according to DIN
42955/12.81.
● Test brake holding torque (option)
10.1.3 Test on the Customer Side
Since all IndraDyn S motors undergo a standardized inspection procedure,
high-voltage tests on the customer side are not required. Motors and compo-
nents could be damaged if they undergo several high-voltage inspections.
DANGER
Destruction of motor components by improperly executed high-voltage
inspection! Invalidation of warranty!
⇒ Avoid repeated inspections.
⇒ Observe the regulations of EN 60034-1 (= VDE 0530-1).
10.2 Identification and Checking of the Supplied Goods
10.2.1 Shipping documents and delivery note
The total scope of a delivery can be seen in the delivery note or waybill. How-
ever, the contents of a delivery can be distributed over several packages.
Each individual package can be identified using the shipment label attached to
the outside.
Electrical test
Mechanical test
Project Planning Manual | Rexroth IndraDyn S Electric Drives
and Controls
| Bosch Rexroth AG 175/194
Handling, Transport and Storage