Technical data

10.2.2 Name plate
Each device has an individual type label containing the device designation and
technical information.
● After receiving the goods, compare the ordered and the supplied type.
Submit claims concerning deviations immediately.
The motor is delivered with its own separate name plate. This is attached to the
motor housing. In addition, a second name plate is attached using two-side tape
onto the original motor name plate. The second can be put where visible on the
machine, if the original name plate on the motor be concealed by parts of the
machine.
Fig.10-1: Type label (example: IndraDyn S)
The name plate is provided for
● Identification of the motor
● Procurement of spare parts in case of a failure,
● Service information.
The type designation of the motor is also filed in the encoder data
memory.
10.3 Handling of the Equipment
CAUTION
Damages or injuries and invalidation of the warranty due to improper
handling!
⇒ Avoid mechanical stressing, throwing, tipping or dropping of the products.
⇒ Use only suitable lifting equipment.
⇒ Never lift up the motor on the optional fan housing.
⇒ Use suitable protective equipment and protective clothing during transport.
⇒ Protect the products from dampness and corrosion.
On delivery, IndraDyn S motors have protective sleeves and covers on the drive
shaft and the flange sockets. During transport and storage, the protective
sleeves must remain on the motor.
● Remove the protective sleeves just before assembly.
● Also use the protective sleeves if you return the goods.
Motor
176/194 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDyn S | Project Planning Manual
Handling, Transport and Storage