Technical data

③ Power plug protective sleeve
② Encoder plug protective sleeve
① Shaft protective sleeve
Fig.10-2: IndraDyn S protective sleeves
● Avoid damage to the motor flange and drive shaft.
● Avoid blows to the drive shaft.
Fig.10-3: Care of the shaft end
Blows to the shaft end damage the encoder and the ball bearings! Drive ele-
ments such as pulleys, clutch discs, gears, etc. may be attached or removed
only by uniformly heating the drive elements or using suitable mounting or dis-
mantling equipment.
● Use cranes with lifting sling belts to lift the motors.
Fig.10-4: Lifting and transporting motors by means of lifting sling belts
10.4 Transport of the Equipment
Requirements for transport according to DIN EN 60271-3-2.
Project Planning Manual | Rexroth IndraDyn S Electric Drives
and Controls
| Bosch Rexroth AG 177/194
Handling, Transport and Storage