Technical data

Digital Color Camera Configuration | en 21
Bosch Security Systems Installation and Operation manual AM18-Q0603 | v1.0 | 2011.04
4.2 Main menu structure
*Note:
If the camera is in NightSense mode, the color settings and
color menu are not accessible. NightSense must be Off to make
color adjustments.
Item Selection Description
Level -15 to +15 Video level control: A positive value is
more useful for low-light conditions; a
negative value is more useful for very
bright conditions.
Shut/AGC Submenu Picture enhancement and performance
BLC On, Off, Set to On to enable Back Light
Compensation (BLC). When On, the
level is optimized at the center of the
screen. Parts outside the center may
be under- or over-exposed (this is
normal).
Color* ATW
AWB hold
Submenu
White balance and color rendition (not
available in NightSense mode)
Sync Internal
Line lock
Internal - for free running camera
operation.
Line lock - to lock to the AC power
supply
V-Phase 0 to 358° Adjusts the vertical phase
(only available if sync = line lock).
Exit Exit the menu