Datasheet

ManualsBrandsBosch ManualsSecurity CamerasVEZ-211-IWCS

101

102

103

104

105

106

107

108

109

110

Cameras, PTZ | MIC series - Ruggedized PTZ Cameras | 93

Technical Specifications

Camera Module

Image sensor 1/4‑inch EXview CCD

Picture elements 380 K NTSC / 440 K PAL (WIDE)

Horizontal resolution 18x module:

470 TVL NTSC/PAL typical

36x module:

470 TVL NTSC/PAL typical

Filter Automatic mechanical IR cut filter

Focus system Auto or manual

Iris Auto or manual with slow shutter in-

tegration modes

Synchronization Internal / External (V‑Lock)

Recommended illumination 100 to 100,000 lx

Signal/Noise ratio 50 dB or more

Back Light Compensation (BLC) On/Off

White balance Automatic

Automatic Gain Control (AGC) -3 to -28 dB, 2 dB steps

Aperture control 16 Steps

18x optical zoom module

Lens F=4.1 mm (WIDE) to 73.8 mm (TELE), F1.4 to F3.0

Zoom 18x optical (12x digital)

Angle of view 48º (WIDE end) to 2.8º (TELE end)

Minimum illumina-

tion

0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL), 0.11 lux

(F1.4, 1/4s NTSC, 1/3s PAL), 0.01 lux or less

(F1.4, 1/4s NTSC, 1/3s PAL, ICR ON)

Shutter speed 1/1 to 1/10,000s (22 steps) NTSC, PAL

36x optical zoom module

Lens F=3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to

F4.5

Zoom 36x optical (12x digital)

Angle of view 57.8º (WIDE end) to 1.7º (TELE end)

Minimum illumina-

tion

1.4 lux (1/60 s NTSC, 1/50 s PAL, typical)

0.1 lux (1/4 s NTSC, 1/3 s PAL, typical)

ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)

Shutter speed 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to

1/10,000s (20 steps) PAL

Operational

Auto flip Yes

Manual flip Yes

Presets 64 telemetry presets utilizing resolv-

er technology (using FV protocol, 10

camera set-up presets to allow

ANPR, color correction, etc.)*

Preset tours 6 tours each with up to 32 presets

Sector titles Yes (64 sectors) 20 characters per

title

Preset titles 20 character caption for each of the

64 presets

Home position Yes (preset 1 or tour)

*Functions available when used with the Forward Vision

Protocol, other protocols may vary.

Communication and Protocols

Communication RS485 / RS422

Control protocol Bosch, Forward Vision, Pelco, Amer-

ican Dynamics, and VCL protocol

variants available.

Bi-phase control requires Biphase to

RS485 converter (MIC-BP4) to be

installed in the power supply (availa-

ble separately).

Connectivity

Video Co-axial via composite cable

Telemetry Twisted pair. Simplex, half and full

duplex operation via composite ca-

ble

Power Via composite cable

Alarms

Alarm inputs 1 tamper input (additional inputs

possible with optional alarm card in

PSU)

Alarm communication Tamper switch (ground connection)

Mechanical

Drive unit Integral pan/tilt motor drive

Pan angle 360° continuous rotation

Pan speed Up to 90° per second (variable)

Tilt angle 320°

Tilt speed 0.2° to 90° per second (variable)

Speed control Closed‑loop electronics

Preset accuracy Better than 0.08°

Proportional P/T to zoom Yes

Physical

Construction material Machined aluminum

Viewing window Tempered flat glass

Standard colors Black (RAL9005), White (RAL9003)

Standard finish Alochrom 1200 surface treatment

with powder coat paint.

Dimensions (W x H x D) 286 x 523.6 x 189 mm

(11.26 x 20.61 x 7.44 in.)

(including deep conduit adapter)

Weight 15.5 Kg (34.17 lb)

(including 4‑in. PCD base and sup-

plied deep conduit adapter)

Environmental

Operational temperature -20 °C to +60 °C (-4 °F to 160 °F)

Weatherproofing IP68

Electrical

Input voltage 18VAC

Power consumption 25.2 W max

Note: MIC Series power supplies and accessories are not

ATEX compliant. These should be located outside the

hazardous area or provided with ATEX-compliant

enclosures and cable conduit or cable glands.