Datasheet

Cameras, PTZ | High-speed Positioning Systems | 113
Environmental
Operating Temperature –20 ºC to +50 ºC (–4 ºF to +122 ºF)
Storage Temperature –20 ºC to +60 ºC (–4 ºF to +140 ºF)
Humidity <90% relative humidity (non-condensing)
Enclosure Protection IP 66
Camera Speficiations
UPH-C485 Series
Camera Model
LTC 0485 Dinion
XF
Color, 1/3-inch Digital CCD
Camera
Active Pixels
NTSC 768 H x 492 V
PAL 752 H x 582 V
Sensitivity (3200 k)
Sensitivity
(full video)
4
2.4 lux (0.24 fc)
Sensitivity 50 IRE
4
0.59 lux / 0.24 lux (NightSense)
(0.059 fc / 0.024 fc (NightSense))
Minimum
Illumination
4
0.24 lux / 0.10 lux (NightSense)
(0.024 fc / 0.01 fc (NightSense))
Minimum Illumina-
tion with SensUp
0.024 lux / 0.010 lux (NightSense)
(0.0024 fc / 0.0010 fc (NightSense))
Horizontal
Resolution
540 TVL
Signal-to-Noise-Ra-
tio
> 50 dB
Video Output 1 Vpp, 75 Ohm
Y/C Output Y: 1 Vpp / C: 0.3 Vpp
Synchronization Internal, Line Lock, HV-lock and genlock (Burst lock)
selectable
Electronic Shutter Auto (1/60 [1/50] to 1/500000), fixed, flickerless,
default
SensUp Off, automatic continuous up to 10x
Auto Black On, off selectable
Range 32x dynamic range enhancement
Dynamic Noise Re-
duction
Auto, off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or fixed
level selectable
White Balance ATW (2500–10000 K), AWB hold, manual WB se-
lectable
VMD Four (4) area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronal
Input
75 Ohm or High Impedance selectable
Cable Compensa-
tion
Up to 1000 m (3000 ft) coax without external ampli-
fiers (automatic set-up in combination with coaxial
communication)
Camera ID 16-character editable string, position selectable
Remote Control Bi-directional coaxial communication
4. F1.2, 89% reflection, SensUp Off
UPH-C498 Series
Camera Model LTC 0498 Dinion 2X Day/Night, 1/3-inch
Digital CCD Camera
Active Pixels
NTSC 768 H x 494 V
PAL 752 H x 582 V
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Usable picture
(30 IRE)
Color 2.4 lx
(0.24 fc)
0.59 lx
(0.059 fc)
0.24 lx
(0.024 fc)
Color
+ SensUp 10x
0.24 lx
(0.024 fc)
0.059 lx
(0.0059 fc)
0.024 lx
(0.0024 fc)
Monochrome - 0.08 lx
(0.008 fc)
0.038 lx
(0.0038 fc)
Monochrome
+ SensUp 10x
- 0.008 lx
(0.0008 fc)
0.0038 lx
(0.00038 fc)
Horizontal Resolution 540 TVL
Signal-to-Noise Ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
SensUp Adjustable from Off up to 10x
Day/Night Color, Mono, Auto
Auto Black Automatic continuous, Off
Dynamic Engine XF-Dynamic, 2X-Dynamic, SmartBLC
Dynamic Range 120 dB (20-bit image processing)
Dynamic Noise Reduction Auto, On/off selectable
Sharpness Sharpness enhancement level selectable
SmartBLC On/Off
AGC AGC On/Off (0 dB) selectable
Peak White Invert On/Off
White Balance ATW, ATWhold and manual (2500–10000 K)
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC
max.
Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronization
Input
75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without exter-
nal amplifiers (automatic set-up in combina-
tion with Bilinx coaxial communication)
Camera ID 17-character editable string, position selecta-
ble
www.boschsecurity.com Bosch Security Systems B.V.
1