Datasheet

114 | Cameras, PTZ | High-speed Positioning Systems
Test Pattern Generator Color bars 100%, Grayscale 11-step, Saw-
tooth 2H, Checker board, Cross hatch, UV
plane
Modes Six (6) preset programmable modes
Remote Control Bilinx coaxial bi-directional communication
Video Motion Detection One area, fully programmable
Controls OSD with soft-key operation (multi-lingual)
UPH-C610 Series
Camera Model
LTC 0610 Dinion
XF
Color, 1/2-inch Digital CCD
Camera
Active Pixels
NTSC 768 H x 492 V
PAL 752 H x 582 V
Sensitivity (3200 k)
Sensitivity
(full video)
5
1.4 lx (0.14 fc)
Sensitivity 50 IRE
5
0.35 lux / 0.14 lux (NightSense)
(0.035 fc / 0.014 fc (NightSense))
Minimum
Illumination
5
0.18 lux / 0.08 lux (NightSense)
(0.018 fc / 0.008 fc (NightSense))
Minimum Illumination
with SensUp
0.018 lux / 0.008 lux (NightSense)
(0.0018 fc / 0.0008 fc (NightSense))
Horizontal Resolution 540 TVL
Signal-to-Noise-Ratio > 50dB
Video Output 1Vpp, 75 Ohm
Y/C Output Y: 1 Vpp / C: 0.3 Vpp
Synchronization Internal, Line Lock, HV-lock and Genlock (Burst
lock) selectable
Shutter Auto (1/60 [1/50] to 1/500000), fixed, flicker-
less, default
Night Sense Auto, Forced, Off
SensUp Off, automatic continuous up to 10x
Auto Black On/Off selectable
Dynamic Range 32x dynamic range enhancement
Dynamic Noise Reduc-
tion
Auto, Off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or fixed
level selectable
White Balance ATW (2500–10000 K), AWB hold, manual WB se-
lectable
VMD Four (4) area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay Max. 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronal
Input
75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external
amplifiers (automatic setup in combination with
coaxial communication)
Sensitivity (3200 k)
Camera ID 16-character editable string, position selectable
Remote Control Bi-directional coaxial communication
5. F/1.2, 89% reflection, SensUp off
UPH-C630 Series
Camera Model LTC 0630 Dinion 2X Day/Night, 1/2-inch Digital
CCD Camera
Active Pixels
NTSC 768 H x 494 V
PAL 752 H x 582 V
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Usable picture
(30 IRE)
Color 1.4 lx
(0.14 fc)
0.31 lx
(0.031 fc)
0.18 lx
(0.018 fc)
Color
+ SensUp 10x
0.14 lx
(0.014 fc)
0.031 lx
(0.0031 fc)
0.018 lx
(0.0018 fc)
Monochrome - 0.052 lx
(0.0052 fc)
0.024 lx
(0.0024 fc)
Monochrome
+ SensUp 10x
- 0.0052 lx
(0.00052 fc)
0.0024 lx
(0.00024 fc)
Horizontal Resolution 540 TVL
Signal-to-Noise Ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
SensUp Adjustable from Off up to 10x
Day/Night Color, Mono, Auto
Auto Black Automatic continuous, Off
Dynamic Engine XF-Dynamic, SmartBLC
Dynamic Range 96 dB (16-bit image processing)
Dynamic Noise Reduction Auto, On/Off selectable
Sharpness Sharpness enhancement level selectable
SmartBLC On/Off
AGC AGC On/OffOff (0 dB) selectable
Peak White Invert On/Off
White Balance ATW, ATWhold and manual (2500–10000 K)
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +3.3 V nominal, +40 VDC
max.
Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronization
Input
75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without exter-
nal amplifiers (automatic set-up in combina-
tion with Bilinx coaxial communication)
Camera ID 17-character editable string, position selecta-
ble
Bosch Security Systems B.V. www.boschsecurity.com
1