Datasheet

176 | Cameras, Fixed | Monochrome Cameras
Programmable Modes
The camera supports three independent operating modes.
The 3 modes are preprogrammed for typical applications,
but are fully programmable for individual situations.
Switching between modes is easy via Bilinx or the external
alarm input.
SensUp
By increasing the integration time on the CCD up to 10
times, the effective sensitivity is dramatically enhanced,
especially useful where there is no artificial lighting and
you rely on the moon, stars and scattered radiation.
Certifications and Approvals
Region Certification
Europe CE EC-Declaration of Conformity
Electromagnetic Compatibility
Emission EN55022 class B, FCC class B part 15
Immunity EN50130-4 Alarm Systems, Part 4
Vibration Camera with 500 gr (1.1 lbs) lens according to
IEC60068-2-27
Safety
EN60065 (/10 and /50 models)
UL6500, cUL CAN/CSA E60065-00 (/20 and /60 models)
Installation/Configuration Notes
Dimensions in mm (inches)
Parts Included
Quantity Components
1
LTC 0385 Series Dinion
XF
Monochrome Camera
1 Spare male 4–pin lens connector
Lens not included
Technical Specifications
Electrical
Model No. Voltage Range System
LTC 0385/10 12 – 28 VAC 11 –
39 VDC
45 – 65 Hz CCIR
LTC 0385/20 12 – 28 VAC 11 –
39 VDC
45 – 65 Hz EIA
LTC 0385/50 85 – 265 VAC 45 – 65 Hz CCIR
LTC 0385/60 85 – 265 VAC 45 – 65 Hz EIA
Power Consumption 4 W
Imager Interline transfer CCD, 1/3-inch image for-
mat
Active Pixels
CCIR Models: 752 H x 582 V
EIA Models: 768 H x 492 V
Sensitivity
Sensitivity (Full video)
1)
0.23 lux (0.023 fc)
Sensitivity 50 IRE
1)
0.046 lux (0.0046 fc)
Minimum Illumination
1)
0.031 lux (0.0031 fc)
Minimum Illumination with
Sens UP
0.0031 lux (0.00031 fc)
Horizontal Resolution 570 TVL
Signal-to-Noise-Ratio > 50 dB
Video Output 1 Vpp, 75 ohm
Synchronization Internal, line lock or genlock selectable
Electronic Shutter Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Sensitivity Up Off, automatic continuous up to 10x
Auto Black On, off selectable
Range 32x dynamic range enhancement
Noise Reduction Auto, off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB)
or fixed level selectable
VMD 4 area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input(TTL) Profile switching, +5 V nominal, +40 VDC
max.
Alarm Output Relay max. 30 VAC or +40 VDC, max. 0,5 A con-
tinuous, 10 VA
External Synchronal Input 75 ohm or high impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without exter-
nal amplifiers (automatic set-up in combina-
tion with coaxial communication)
Camera ID 16 character editable string, position se-
lectable
Bosch Security Systems B.V. www.boschsecurity.com
2