Datasheet

232 | Cameras, Fixed | Extreme Series
EX72 Explosion‑protected
Camera
Features
UL/CSA or ATEX certified for explosion protected
performance
Class I, II, III, Div. 1, 2, Groups B, C, D, E, F, G, T6
Safe for use where explosive gases are normally
present
High-strength design can withstand an internal
explosion
Compact design with threaded flame paths for
maximum safety
Vari-focal auto-iris lens options
The EX72 is a tough, compact, explosion-protected
camera with performance optics for effective surveillance
in hazardous locations such as oil and gas and chemical
facilities.
The EX72 is certified for ATEX Zone 1 or NEC Class I,
Division 1 environments, the most stringent safety
standards for explosion-protected performance. In
practical terms, the Class I, Division 1 certifications signify
that the EX72 is safe for use even in environments where
explosive gases are present under normal operating
conditions.
The EX72 incorporates high-strength design, featuring
construction of sand-cast, copper-free aluminum strong
enough to withstand an internal explosion. Threaded
flame paths extinguish burning explosive gases and allow
them to exit the housing harmlessly, without risking
ignition in the external environment.
By meeting the rigorous requirements for Class I,
Division 1 environments, the EX72 assures safe, effective
performance at less hazardous Class II and Division 2
locations.
Rated NEMA 4X for both indoor and outdoor use, the
EX72 carries a T6 temperature code, the lowest and safest
rating. When combined with the optional EX72LED infra-
red illuminator, the EX72 provides exceptional 24/7
surveillance. The EX72 is easy to install into any 12 VDC or
24 VAC system, and is a safe and effective surveillance
solution for hazardous locations.
Functions
Applications
Petroleum processing facilities
Chemical factories
Agricultural processing plants
Refineries
Munitions storage
Oil and gas plants
Fuel storage sites
Industrial plants
Nuclear facilities
Pharmaceutical plants
Aircraft hangers
Performance Optics
Performance CCD with mechanical filter technology
Enables effective surveillance in low-light
environments
Sensor provides higher IR sensitivity, low smear, low
streaking and excellent anti-blooming characteristics
Compact Ruggedized Construction
Small, unobtrusive and discreet housing
Certified CSA Type 4X design for indoor and outdoor
performance
High-strength reinforced aluminum construction
strong enough to withstand an internal explosion.
Threaded flame paths extinguish burning explosive
gases, allowing them to exit the housing harmlessly,
without risking ignition in the external environment
Installer-Friendly Features
Varifocal lens 4 to 9 mm or 9 to 22 mm
12 VDC / 24 VAC operation
Optional pan-tilt brackets
Optional wall and pole adapter plates
Certifications and Approvals
Region Certification
Europe CE ATEX
Canada CSA
Bosch Security Systems B.V. www.boschsecurity.com
2