Datasheet

246 | Cameras, Fixed | Extreme Series
EX40N Series Ultra
Vandal-Proof Dome
Features
▶
Ultra vandal-resistant construction
▶
Virtually zero focus shift from color to IR modes
▶
12 m (40 ft) of evenly-distributed night vision
▶
Conduit compatible for easy installation
▶
Weather-sealed; designed to NEMA 4X
▶
Reliable performance in -40ºC to +60ºC (-40ºF to
+140ºF) temperature range
▶
2.8-10 mm varifocal auto-iris lens
The EX40N series brings the latest imaging technologies
into the world of Integrated Day-Night surveillance for
truly outstanding 24/7 effectiveness.
Using a dual window IR-Cut and IR-Pass filter, the EX40N
delivers brilliant color during day and sensitivity to
infrared at night. Both ensure virtually zero focus shift
between color and infrared modes, allowing sharp focus
under all lighting conditions.
The EX40N uses MX4 CCD technology for outstanding
spectral response in the near infrared. The video signal is
characterized by low-smear, low-streak and excellent anti-
blooming characteristics for excellent active-IR night
vision.
Integrated Day-Night design with spatially optimized LED
geometry and optical lens shield deliver 12 meters
(40 feet) of evenly-distributed Night Vision with virtually
no internal reflection or halo effects. The varifocal, auto-
iris lens not only allows easy installation, but also helps to
prevent washed-out images under IR.
The EX40N uses a Video Patch Lead (VPL) for convenient
installation. An optional Video Patch Connector (VPC)
plugs into the VPL at the camera side. With this feature,
installers can connect portable LCD monitors for instant
video confirmation of camera positioning.
Vandal-resistant, all-weather ready and packed with
practical enhancements such as a Pan-Tilt-Twist gimbal,
conduit compatibility, and a 2.8-10 mm varifocal auto-iris
lens, the EX40N is ideal for a wide variety of applications.
Constructed from anodized aluminum, tested for
performance in temperatures ranging from -40ºC to
+60ºC (-40ºF to +140ºF).
Functions
Applications
•
Night-time surveillance
•
Zero-lux environments
•
Commercial sites
•
Hotels and casinos
•
Transportation hubs
•
Restaurants / bars
•
Industrial parks
•
Banks
•
Prisons and correctional facilities
•
Schools, colleges and universities
•
Vandal-prone locations
Technical Specifications
Image Sensor MX4 Hi-Resolution Extended Day/
Night CCD
Resolution 540 TVL color / 540 TVL mono
Effective Pixels (NTSC) 768(H) x 494(V)
Effective Pixels (PAL) 752(H) x 582(V)
Daytime Sensitivity 0.02 Lux with F1.4 lens
Night-time Sensitivity 0 lux with infrared (B/W)
S/N Ratio Greater than 48dB (AGC off)
Filter Dual-window IR-Pass / IR-Cut me-
chanical type
Output Signal 1Vp-p, 75 Ohm
Gamma 0.45
Gain Control AGC (with on/off switch)
Electronics Iris 1/60 to 1/100,000 (NTSC) • 1/50
to 1/100,000 (PAL)
Gimbal Pan-Tilt-Twist for easy installation
LEDs High-efficiency, spatially optimized,
850 nm or 940 nm
Number of LEDs 18
Day-Night Switching Photocell-controlled, automatic
Voltage Regulation Dual VRB design for enhanced elec-
tronic stability
Voltage Supply 12-24 VAC (50/60 Hz)
12-24 VDC
Power Draw 8 W Max.
Bosch Security Systems B.V. www.boschsecurity.com
2