Datasheet

298 | Cameras, MiniDome | Analog MiniDomes
Day/Night Mode
The day/night mode provides enhanced night viewing by
increasing the IR sensitivity. The IR filter can switch from
color to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can be
switched manually via the alarm input, through the camera
menu or via the Bilinx coaxial control interface. An internal
through-the-lens IR detector enhances the monochrome
mode stability, as it prevents reverting to the color mode
when IR illumination is dominant. IR contrast is also
measured and used to handle reflected IR light in outdoor
scenes.
Privacy masking
Four different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the scene to
be masked.
Default Shutter
The default shutter speed captures fast moving objects
when sufficient light is available. When light levels fall and
other adjustments have been exhausted, the shutter
speed reverts to a standard setting to maintain sensitivity.
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch FlexiDome
cameras. Technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate set-up
and adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to transmit
alarm and status messages, providing superior
performance without additional installation steps.
Ease of installation
Several features are available that make installation easy:
•
Video connection BNC on flying lead
•
Power connection on flying leads
•
A built-in test pattern generator produces signals to
test and fault-find cables.
•
A multi-language On-Screen Display (OSD) increases
user compatibility.
Programmable Modes
Six independent, pre-programmed operating modes
support typical applications, but are fully programmable
for individual situations. Switching between modes is easy
via Bilinx or the external alarm input.
High efficiency
A high efficiency power supply improves maximum
operating temperature.
Video Motion Detection
The built-in video motion detector allows you to select a
programmable area with individual thresholds. The global
scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on
or off the indoor or security lighting. When motion is
detected, alarms can be displayed in the video signal, the
output relay can be closed or an alarm message can be
transmitted via Bilinx.
SensUp Dynamic
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight
for illumination.
Typical applications
•
Entrance foyer/lobby with glass
•
Warehouses and loading bays
•
Prisons and correctional facilities
•
Airport locations including:
-
baggage handling
-
fuel and equipment storage
•
Stadium
Certifications and Approvals
Region Certification
Europe CE Declaration of Conformity
USA UL
FCC Declaration of Conformity
Canada CSA
Electro Magnetic Compatibility
Emission EN55022 class B, FCC part 15 class B, EN6100-3,
EN50121-4
Immunity EN50130-4 (CE), EN50121-4 (CE)
Vibration IEC60068-2-6
Safety
UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE), UL60950, CAN/
CSA No. 60950
Installation/Configuration Notes
FlexiDome 2X model overview
Model Standard Lens
VDN-498V03-11 PAL 2.8 to 10 mm F1.2
VDN-498V03-21 NTSC 2.8 to 10 mm F1.2
VDN-498V09-11 PAL 9 to 22 mm F1.4
VDN-498V09-21 NTSC 9 to 22 mm F1.4
VDN-498V06-11 PAL 6 to 50 mm F1.6
VDN-498V06-21 NTSC 6 to 50 mm F1.6
Bosch Security Systems B.V. www.boschsecurity.com
4