Datasheet

Camera Enclosures and Mounts | Indoor | 345
UHI‑OG(S)‑0 Indoor
Camera Housing
Features
▶
Protects camera/lens combinations up to 317 mm
(12.48 in) length
▶
Hinged side opening for easy installation and camera
setup
▶
Strong aluminum construction
▶
Cable routing through base or rear of housing
▶
Tamper-resistant
▶
Self cleaning glass
The Indoor Camera Housing is a smartly styled unit,
intended for use inside. This housing is both cost-
competitive and installer-friendly.
Functions
Easy installation
The unique, hinged, side-opening design provides easy
installation of all camera/lens combinations, and allows
access to most camera and lens controls when the
housing is mounted. Route power, video, and lens control
cabling through the liquid-tight fittings in the bottom rear
of the housing, or for even better cable management, via
the feed-through entry holes in the base. Mounting holes
in the base permit installation to a wide range of pan/tilts,
adjustable heads, and various camera-mounting brackets.
Dinion ready
This housing supports installation of Dinion style cameras
with fixed focal, varifocal, or up to a 15x motorized zoom
lens.
Secure
For increased security, the units come with tamper-
resistant screws for the locking clasps to prevent
illegitimate access to the housing contents. The housing is
an optimal solution for protecting your indoor video
surveillance applications.
Certifications and Approvals
Region Certification
Europe CE UHI-OGx
Safety acc. to EN 60950-1 (CE)
acc. to UL 2044-1; CAN/CSA C 22.2 no. 1-98
Immunity acc. to EN 50130-4 (CE)
Emission acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
Installation/Configuration Notes
Dimensions in mm for UHI-OG(S)-0 housings indoor units
Dimensions in mm maximum internal usable space available
(based on camera/lens size)
Note Allowance is provided for wiring and
connector space requirements
www.boschsecurity.com Bosch Security Systems B.V.
7