Datasheet

Camera Enclosures and Mounts | Outdoor Environmental | 373
UHO Series Outdoor
Camera Housing
Features
▶
Protects camera/lens combinations up to 262 mm
(10.32 inch) length
▶
Hinged side opening for easy installation and camera
setup
▶
IP66, NEMA-4X enclosure rating
▶
Strong aluminum construction
▶
Sunshield included
▶
Cable routing through base or rear of housing
▶
Tamper-resistant
▶
Continuous low power window defroster
▶
Self cleaning glass
The UHO series housings are smartly styled housings, for
outdoor use. These housings are both cost-competitive
and installer-friendly. Models are available for use with
24 VAC, 115 VAC, and 230 VAC cameras, to fit a wide
range of applications.
Functions
Easy installation
The unique, hinged, side-opening design provides easy
installation of all camera/lens combinations, and allows
access to most camera and lens controls when the
housing is mounted. Power, video, and lens control
cabling can be routed through liquid-tight fittings in the
bottom rear of the housing, or for even better cable
management, via the feed-through entry holes in the base.
Mounting holes in the base permit installation to a wide
range of pan/tilts, adjustable heads, and various camera
mount brackets.
Flexible
External 4-pin and BNC connectors for power and video,
located in the rear end cap, are also available on 24 VAC
and 230 VAC models. These aluminum-constructed
housings are available with a factory-installed heater and
blower. The heater maintains the internal temperature of
the housing in cold temperature conditions as low as
-40 °C (-40 °F). In combination with a permanent low-
power window defroster and a continuous-duty blower,
the unit minimizes fogging in high humidity locations, and
extends the temperature limits. Sunshields are included
on all outdoor models.
Dinion ready
All models support installation of Dinion style cameras
with fixed focal, varifocal, or up to a 15x motorized zoom
lens.
Secure
For increased security, the units come with tamper-
resistant screws for the locking clasps to prevent
illegitimate access to the housing contents.
Rugged
With a sleek design that meets IP 66 and NEMA-4X
enclosure standards, the UHO Series Housings are the
optimal solution for protecting your video surveillance
equipment from adverse elements.
Certifications and Approvals
Region Certification
Europe CE UHO-HGS
UHO-HGS-50x
Safety acc. to EN 60950-1 (CE)
acc. to UL 2044-1; CAN/CSA C 22.2 no. 1-98
Immunity acc. to EN 50130-4 (CE)
Emission acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
www.boschsecurity.com Bosch Security Systems B.V.
7