Datasheet

412 | Camera Enclosures and Mounts | Pan and Tilt Heads
Recommended Maximum Cable Lengths:
Model Wire Size Distance
Voltage
2)
mm
2)
AWG Feet Meters
24 VAC 0.5 20 140 43
1 18 230 70
1.5 16 360 110
2.5 14 590 180
4 12 940 287
115 VAC 0.5 20 2200 671
1 18 3500 1067
1.5 16 5500 1677
2.5 14 9000 2744
230 VAC 0.5 20 13400 4085
1 18 21200 6463
1.5 16 33300 10152
2.5 14 54400 16585
1) The total power for all models, with both motors running, is 24 W.
2) Values calculated at 20° C (68° F) using stranded tinned copper wire,
a common ground (neutral), and with both pan and tilt motors operating
simultaneously.
Mechanical
Mounting These units are designed for either upright or inverted in-
stallations. To maintain weatherproof integrity when
mounting outdoors in an inverted position, the unit must
be installed in a weatherproof enclosure (e.g., weather-
proof domed housing), or a protected outside area. They
can only be mounted upright or inverted; never horizontal-
ly.
Pan Range (Movement in
horizontal plane)
0° to 345° maximum
Pan Speed 7°/seconds
Tilt (Movement in vertical
plane)
+30° to –90° from horizontal
Tilt Speed 3.5°/s seconds
Maximum Load 149 kg-cm (129 lb-in.) torque or 10 kg (22 lb) at a dis-
tance of 63.5 mm (2.5 in.) from the center of mass of
the camera/lens/housing assembly to the center of the
tilt table
Construction Cast aluminum base and yoke, corrosion resistant plas-
tic cover
Finish Light gray
Dimensions See Dimensional Outline
Weight 6.21 kg (13.7 lb)
Environmental
Temperature Operating: –30°C to +60°C (–22°F to +140°F)
Storage: –40° to +60°C (–40°F to +140°F)
Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
Shock 50 g, 11 ms, 1/2 sine
Enclosure Tested to IP54 requirements (upright mount- ing). UL 50
Type 3/NEMA-3 design.
Ordering Information
LTC 9418/10 Weatherproof Standard Pan/
Tilts
Max Load 10 kg, 24 VAC, 50 Hz
LTC 9418/10
LTC 9418/11 Weatherproof Pre-Position
Pan/Tilts
Max. load 10 kg, 24 VAC, 50 Hz
LTC 9418/11
LTC 9418/20 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 24 VAC, 60 Hz
LTC 9418/20
LTC 9418/21 Weatherproof Pre-Position
Pan/Tilts
Max. load 10 kg, 24 VAC, 60 Hz
LTC 9418/21
LTC 9418/50 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 230 VAC, 50 Hz
LTC 9418/50
LTC 9418/51 Weatherproof Pre-Position
Pan/Tilts
Max. load 10 kg, 230 VAC, 50 Hz
LTC 9418/51
LTC 9418/60 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 120 VAC, 60 Hz
LTC 9418/60
LTC 9418/61 Weatherproof Pre-Position
Pan/Tilts
Max. load 10 kg, 120 VAC, 60 Hz
LTC 9418/61
Accessories
LTC 9216/00 Versatile Mount
for 16-inch, 45.3 kg (100 lb) max load, light
gray finish
LTC 9216/00
LTC 9214/00 Versatile Mount
for 14-inch, 90.6 kg (200 lb) max load up-
right, light gray finish
LTC 9214/00
LTC 9226/00 Versatile Mount
for LTC 9216 and LTC 9222, 45.3 kg
(100 lb) max load, corner mount bracket,
light gray finish
LTC 9226/00
LTC 9222/00 Versatile Mount
for 22-inch, 90.6 kg (200 lb) max load, light
gray finish
LTC 9222/00
LTC 9227/00 Versatile Mount
for LTC 9216 and LTC 9222/00 , 45.3 kg
(100 lb) max load, adjustable head, light gray
finish
LTC 9227/00
LTC 9228/00 Versatile Mount
for LTC 9216/00 and LTC 9222/00 wall
mounts, 45.3 kg (100 lb) max load, flange
bracket
LTC 9228/00
LTC 9224/00 Versatile Mount
for 24-inch, 90.6 kg (200 lb) max load up-
right, light gray finish
LTC 9224/00
LTC 9225/00 Pole Mount
45.3 kg (100 lb) max load, pole mount, light
gray finish
LTC 9225/00
Bosch Security Systems B.V. www.boschsecurity.com
7