Datasheet

Camera Enclosures and Mounts | Pan and Tilt Heads | 413
LTC 9420 Series Outdoor
Pan/Tilts
Features
▶
Maximum Load: 10 kg (22 lb)
▶
Low Profile, Compact Size
▶
Feed-through Wiring
▶
100% Duty Cycle Motors
▶
Upright or Inverted Operation
▶
Pre-position and 345° Models Available
The LTC 9420 Series Weatherproof Pan/Tilts are low
profile, compact units constructed with corrosion
resistant hardware. Featuring feed-through wiring for lens
and camera power, video, and external sync connections,
these remote positioning devices are rated for a maximum
load of 10 kg (22 lb) and are fully system compatible with
CCD cameras, lenses, and housing combinations
The 100% duty cycle motors permit continuous operation
on all models. Low speed worm drives and flexible motor
mounts offer quiet, smooth motion. The use of impedance
and overload protected motors, long life limit switches,
and permanently lubricated bearings reduce maintenance
and provide reliable operation.
Certifications and Approvals
Product Regulatory Compliance
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE reg-
ulations
Product Safety Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Installation/Configuration Notes
Dimensional Outline
1 Top view
2 Side view
3 Bottom view
4 Ground screw (on other side of multipin connector)
5 Multipin connector
6 BNC Connector
Technical Specifications
Electrical
Model No.
1)
Rated Motor Voltage Operational Voltage
Range
Standard Models –0° to 345°
LTC9420/60 110 VAC, 60 Hz 108 to 132 VAC
LTC9420/20 24 VAC, 60 Hz 21.6 to 26.4 VAC
LTC9420/10 24 VAC, 50 Hz 21.6 to 26.4 VAC
LTC 9420/50 220 VAC, 50 Hz 207 to 253 VAC
Pre-position Models –0° to 345°
LTC9420/61 110 VAC, 60 Hz 108 to 132 VAC
LTC9420/21 24 VAC, 60 Hz 21.6 to 26.4 VAC
www.boschsecurity.com Bosch Security Systems B.V.
7