Datasheet

414 | Camera Enclosures and Mounts | Pan and Tilt Heads
Model No.
1)
Rated Motor Voltage Operational Voltage
Range
LTC9420/11 24 VAC, 50 Hz 21.6 to 26.4 VAC
LTC9420/51 220 VAC, 50 Hz 207 to 253 VAC
Connectors:
Power Via 24-pin connector on base through to 3-conductor ca-
ble on pan head
Lens and Ac-
cessories
Via 24-pin connector on base through to 10-conductor
cable on pan head
Video Via BNC connector on base through to Flying Lead coax
on pan head
Ground Screw connection for grounding on base
Recommended Maximum Cable Lengths:
Model Wire Size Distance
Voltage
2)
mm
2
AWG Feet Meters
24 VAC 0.5 20 140 43
1 18 230 70
1.5 16 360 110
2.5 14 590 180
4 12 940 287
115 VAC 0.5 20 2200 671
1 18 3500 1067
1.5 16 5500 1677
2.5 14 9000 2744
230 VAC 0.5 20 13400 4085
1 18 21200 6463
1.5 16 33300 10152
2.5 14 54400 16585
1) The total power for all models, with both motors running, is 24 W.
2) Values calculated at 20° C (68° F) using stranded tinned copper wire
common ground (neutral), and with both pan and tilt motors operating
simultaneously.
Mechanical
Mounting These units are designed for either upright or inverted installa-
tions to 345° To maintain weatherproof integrity when mount-
ing outdoors in an inverted position, the unit must be installed
in a weather- proof enclosure (e.g., weatherproof domed
housing) or a protected outside to 345° area. They can only be
mounted upright or inverted; never horizontally.
Pan Range (Movement in horizontal plane)
Pan Speed 7°/sec
Tilt (Movement in vertical plane)
+30° to -90° against the horizontal
Tilt Speed 3.5°/sec
Maximum Load 149 kg-cm (129 lb-in.) torque or 10 kg (22 lb) at
a distance of 63.5 mm (2.5 in.) from the center of
mass of the camera/lens/housing assembly to the
center of the tilt table
Construction Cast aluminum base and yoke, corrosion resistant
plastic cover
Finish Light gray
Dimensions See Dimensional Outline
Weight 6.67 kg (14.7 lb)
Environmental
Temperature
Operating –30°C to +60°C (–22°F to +140°F)
Storage –40°C to +60°C (–40°F to +140°F)
Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
Shock 50 g, 11 ms, 1/2 sine
Enclosure Tested to IP54 requirements. UL 50 Type 3/NEMA-3
design (upright mounting)
Ordering Information
LTC 9420/10 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 24 VAC, 50 Hz, feed-
through wiring
LTC 9420/10
LTC 9420/11 Weatherproof Pre-position
Pan/Tilts
Max. load 10 kg, 24 VAC, 50 Hz, feed-
through wiring
LTC 9420/11
LTC 9420/12 Weatherproof Continuous
Pan Pan/Tilts
Max. load 10 kg, 24 VAC, 50 Hz, feed-
through wiring
LTC 9420/12
LTC 9420/13 Weatherproof Continuous
Pan Models with Pre-position
Max. load 10 kg, 24 VAC, 50 Hz, feed-
through wiring
LTC 9420/13
LTC 9420/20 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 24 VAC, 60 Hz, feed-
through wiring
LTC 9420/20
LTC 9420/21 Weatherproof Pre-position
Pan/Tilts
Max. load 10 kg, 24 VAC, 60 Hz, feed-
through wiring
LTC 9420/21
LTC 9420/22 Weatherproof Continuous
Pan Pan/Tilts
Max. load 10 kg, 24 VAC, 60 Hz, feed-
through wiring
LTC 9420/22
LTC 9420/23 Weatherproof Continuous
Pan Models with Pre-position
Max. load 10 kg, , 24 VAC, 60 Hz, feed-
through wiring
LTC 9420/23
LTC 9420/50 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 230 VAC, 50 Hz, feed-
through wiring
LTC 9420/50
LTC 9420/51 Weatherproof Pre-position
Pan/Tilts
Max. load 10 kg, 230 VAC, 50 Hz, feed-
through wiring
LTC 9420/51
LTC 9420/60 Weatherproof Standard Pan/
Tilts
Max. load 10 kg, 120 VAC, 60 Hz, feed-
through wiring
LTC 9420/60
Bosch Security Systems B.V. www.boschsecurity.com
7