Datasheet

Camera Enclosures and Mounts | Pan and Tilt Heads | 417
Reference # Description
1 Ground screw (on other side of multi-pin connector)
2 Multi-pin connector
3 BNC connector
Technical Specifications
Electrical
LTC 9440/00 Non-feed-through models
Model Number
1
Rated motor voltage and voltage range
Standard Models - 0° to 345°
LTC 9440/60 120 VAC, 60 Hz, 108 to 132
LTC 9440/20 24 VAC, 60 Hz, 23 to 26.4
Pre-position Models - 0° to 345°
LTC 9440/61 120 VAC, 60 Hz, 108 to 132
LTC 9440/21 24 VAC, 60 Hz, 23 to 26.4
Connectors
Power Via 24-pin connector on base
Ground Screw connection for grounding on
base
1 The total power for all models, with both motors running, is 20 W.
Electrical
LTC 9441 Series Feed-through models
Model Number
2
Rated motor voltage and voltage range
Standard Model - 0° to 345°
LTC 9441/20 24 VAC, 60 Hz, 23 to 26.4
Pre-position Model - 0° to 345°
LTC 9441/21 24 VAC, 60 Hz, 23 to 26.4
2 The total power for all models, with both motors running, is 20 W.
Connectors
Power Via 24-pin connector on base, through
to 3-conductor cable on pan head
Ground Screw connection for grounding on
base
Lens and Accessories Via 24-pin connector on base, through
to 10-connector cable on pan head
Video Via BNC connector on base, through to
flying lead coax on pan head
LTC 9440 and LTC 9441 Series
Recommended Maximum Cable Lengths
Model Voltage Wire Size
Distance
3
mm
2
AWG m ft
24 VAC 0.5 20 140 43
1 18 230 70
1.5 16 360 110
2.5 14 590 180
4 12 940 287
120 VAC
4
0.5 20 2200 671
Recommended Maximum Cable Lengths
1 18 3500 1067
1.5 16 5500 1677
2.5 14 9000 2744
3 Values calculated at 20°C (68°F), using stranded tinned copper wire common ground
(neutral), and with both PAN and TILT motors operating simultaneously.
4 For 24 VAC models operating at or near –30°C, values are based upon maintaining the
supplied voltage within the voltage range specified.
Mechanical
Mounting These units are designed for either upright or
inverted installations. To maintain weather-
proof integrity when mounting outdoors in an
inverted position, the unit must be installed
in a weatherproof enclosure (e.g., weather-
proof domed housing), or in a protected out-
side area. They may only be mounted upright
or inverted; never horizontally.
Pan Range
(movement in horizontal
plane)
0° to 345° maximum
Pan Speed Tilt (movement
in vertical plane)
7°/sec
120 VAC Models +30° to –90° from horizontal
24 VAC Models +30° to –90° from horizontal at specified
temperature range and 23.0 to 26.4 VAC
range
+30° to –75° from horizontal at specified
temperature range and 21.6 to 22.9 VAC
range
Tilt Speed 1.2°/sec
Maximum Load 292 kg-cm (260 lb-in.) torque or 18 kg
(40 lb) at a distance of 123 mm (3.1 in.)
from the center of mass of the camera/lens/
housing assembly, to the center of the tilt ta-
ble
Construction Cast aluminum base and yoke, corrosion-re-
sistant plastic cover
Finish Light gray
Weight 7.05 kg (15.5 lb)
Environmental
Operating Temperature
24 VAC Models
(23 to 26.4 operating V)
–30°C to 50°C (–22°F to 122°F)
120 VAC Models
(108 to 119 operating V)
–30°C to 50°C (–22°F to 122°F)
120 VAC Models
(120 to 132 operating V)
–45°C to 50°C (–49°F to 122°F)
Storage Temperature –40°C to 60°C (–40°F to 140°F)
Vibration 3 g Swept sine wave, 15 Hz to 2000 Hz
Shock 50 g, 11 ms, 1/2 sine
Enclosure Tested to NEMA-3 requirements (upright
mounting) IP54 design
www.boschsecurity.com Bosch Security Systems B.V.
7