Datasheet

Switching and Control | Switching and Control Systems | 421
LTC 8300 Series Full Capacity Configuration Diagram
(32 Cameras by 6 Monitors)
1 Typical AutoDome Camera
2 Video Coax
3 Twisted-Pair Typical
4 32 Separate Alarm Inputs
5 Contact Closure or Active Low Logic Level
6 Six (6) Pairs of Relay Outputs
7 Pan and Tilt
8 Receiver/Driver
9 Up to 32 Receiver/Driver Units
10 Up to 1.5 km (5000 ft) Using 18 AWG Shielded Twisted Pair Cable
(Belden 8786 or Equivalent)
11 Optional LTC 8059/00 MCS or LTC 8850/00 GUI Software Package
can be Run on a Windows
®
based PC
12 Additional System Cameras
13 3 m (10 ft) RS-232 Interface Cable provided with Optional Software
Package
14 LTC 8300 Series Main CPU Bay
15 Serial RS-232 Logging Printer Capability
16 3 m (10 ft) Interconnect Cable Supplied with Keyboard
17 Up to six (6) Monitor Outputs
18 Maximum of 4 Allegiant Series Full-Function Keyboards up to 1.5 km
(5000 ft) Using Optional Remote Hookup Kit
Typical Main Allegiant Control Center
1 Typical System Monitors
(Local and/or Remote Video)
2 Video
3 Typical Fixed Cameras
4 Typical Alarm Input Contact to Activate Local or Satellite Cameras
5 Typical Controllable Camera
6 Typical LTC 8100, LTC 8200, or LTC 8300 Allegiant System
7 Bi-Phase Data Lines to All Local PTZ Camera Sites
8 Typical IntuiKey Keyboard
9 Bi-Phase Control and Satellite Switching Data
10 One (1) Bi-Phase Data Line to Each Remote Satellite Site
11 Incoming Video TRUNK Lines From All Satellite Sites
12 Typical Allegiant Satellite Site
13 Typical Local Monitors (Local Video Only)
14 Typical Fixed Cameras
15 Typical Alarm Input Contact (For Local Alarms Only)
16 Bi-Phase Data
17 IntuiKey Keyboard (PTZ Control of Local Cameras Only)
18 LTC 8780 Data Converter
19 LTC 8569 Code Merger
20 Bi-Phase Control + Satellite Data
www.boschsecurity.com Bosch Security Systems B.V.
8