Datasheet

436 | Switching and Control | Switching and Control Systems
7 Power Supply Module
8 Series Main CPU Bay
9 3 m (10 ft) Interconnect Cable Supplied with Keyboard
10 32 Monitor Output Capacity
11 32 Full Matrix Monitor Outputs Maximum, 32 Full Function Key-
boards Maximum
LTC 8800 Series Dual-bay System (256 Cameras by 64
Monitors)
1 Coax Ribbon Jumper Cables (Supplied)
2 Up to 256 Cameras Total
3 8 x 32 Channel Input Cards (max. 8, each bay)
4 8 x 4 Channel Output Card (max. 8, each bay)
5 CPU Module
6 Power Supply Module
7 Data Receiver Module
8 Main CPU Bay
9 Monitor Expansion Bay
10 Monitor Outputs 1 to 32
11 Monitor Outputs 33 to 64
12 Maximum of 32 Full-function Keyboards up to 1.5 km (5000 ft) away
Using Optional Remote Hookup Kit
Allegiant Satellite Switching System
1 Monitor Outputs
2 Alarm Interface Unit
3 Pan/Tilt/Zoom and Satellite Control Data
4 Allegiant Main CPU Bay
5 Alarm Inputs May Activate Either Local or Satellite Video Main Con-
trol Center's Monitor
6 Inputs Used for both Local and Trunk Lines
7 Local Camera Video
8 Signal Distribution Unit
9 To any Local PTZ Camera Sites
10
Up to 1.5 km (5000 ft) using 1 mm
2
(18 AWG) Shielded Twisted
Pair (Belden 8760 or Equivalent)
11 Allegiant Keyboard Controls any Local or Remote Camera on any Lo-
cal Monitor (Video and PTZ)
12 Multiple Video Trunk Lines from each Remote Satellite Location
13 One Line to Each Remote Satellite System Location
14 Pan/Tilt/Zoom and Satellite Control Data
15 Monitor Outputs Used as Video Trunk Lines to Main Control Site
16 Video Trunk Lines from other Satellite Locations
17 Any Model Allegiant Main Bay
18 Local Monitor
19 Console Port Input
20 Satellite Data Line
21 Data Converter Units
22 To any Local PTZ Camera Sites
23 Code Merger Unit
24 Alarm Interface Unit
25 Local PTZ Control Data Line
26 Alarm Interface Unit only Local Video on Local Monitors
27 Keyboard Controls any of the Local Cameras on any of the Local
Monitors (Video and PTZ)
Bosch Security Systems B.V. www.boschsecurity.com
8