Datasheet

438 | Switching and Control | Switching and Control Systems
Equipment Rack (LTC 8801)
Size
(W x D x H)
EIA 48 cm (19 in.) rack
483 x 420 x 267 mm
(19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction/Finish
Top and Bottom Steel
Front, Sides, and Back Aluminum
Finish Charcoal
Microprocessor Module (LTC 8810/01)
Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.5 kg (1.1 lb)
Power Supply (LTC 8805/60–120 VAC, LTC 8805/50 –220-240 VAC)
Size (W x D x H) 67 x 360 x 247 mm
(2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11.5 lb)
Indicators One power On/Off, ten fuse alert, and one external
sync LED
LTC 8802 Series Monitor Expansion Bay
Includes equipment rack, LTC 8816/01 data receiver module, and
LTC 8805 Series power supply.
Power
Model No. Rated Voltage Voltage Range
Nominal Power
4
LTC 8802/60 120 VAC,
50/60 Hz
100 to 140 200 W
LTC 8802/50 220–240 VAC,
50/60 Hz
198 to 264 200 W
4. Power at rated voltage fully loaded.
Connectors
Video Inputs 1 to 96, and 32 monitor outputs BNC
Sync Input Not used
Video Connections:
97 to 256
Ten (10), 34-pin ribbon connectors used in con-
junction with the LTC 8808/00 video interconnect
panel (purchased separately)
Looping Video Con-
nections:
1 to 256
Sixteen (16), 34-pin ribbon connectors used in
conjunction with the LTC 8808/00 video intercon-
nect panel
External Accessory Interfaces
Console 9-pin D-type connector, not used
Alarm 9-pin D-type connector, not used
Printer 9-pin D-type connector, not used
SDA 9-pin D-type connector, not used
COM Port 9-pin D-type connector RS-485 port for interbay
communication use
(default = 125,000 baud)
COM Port 9-pin D-type connector, not used
Keyboards Eight (8), 6-pin RS-485 ports for Allegiant key-
board use (default = 125,000 baud)
Equipment Rack (LTC 8802 Series)
Size
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm
(19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction/Finish
Top and Bottom Steel
Front, Sides, and
Back
Aluminum
Finish Charcoal
Data Receiver Module (LTC 8816/01)
Size
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm
(19 x 16.5 x 10.5 in.)
Weight 0.5 kg (1.1 lb)
Power Supply (LTC 8805/60–120 VAC, LTC 8805/50220–240 VAC)
Size
(W x D x H)
67 x 360 x 247 mm
(2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11 5 lb)
Indicators One power On/Off, ten fuse alert, and one external
sync LED
LTC 8821/00 Camera Input Module
Use up to eight per bay in main CPU bay. If monitor expansion bay is being
used, equip with duplicate number of modules.
Camera Inputs 32
Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
LTC 8834/00 Monitor Output Module
Use up to eight per bay in main CPU or monitor expansion bay.
Monitor Outputs 4
Size (D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
LTC 8808/00 Video Interconnect Panel
NOTE: Use of the LTC 8808/00 assemblies are required for system video
inputs 97 to 256 and must be purchased separately. The LTC 8808/00
assembly contains an interconnect panel which is used to convert 32 BNC
connectors into two 16- channel ribbon cable connectors. The two, 16-
conductor ribbon cables (LTC 8809/00), designed especially for use with
video signals, and are then used to interconnect the video between the
panel and the LTC 8800 Series system. In addition to being used for video
inputs 97 to 256, the LTC 8808/00 assembly can also be ordered as an
option to provide looping output capability. For looping purposes, one
LTC 8808/00 (includes one panel and two ribbon cables) is required for
each group of 32 cameras.
The following table can be used to determine the number of LTC 8808/00
assemblies that must be purchased:
Number of Sys-
tem
Cameras
Number of LTC 8808 As-
semblies Required for
Camera Input Connec-
tions Only
Number of LTC 8808
Required for Inputs
and Looping Video Out-
puts
1 to 32 None 1
33 to 64 None 2
65 to 96 None 3
97 to 128 1 5
Bosch Security Systems B.V. www.boschsecurity.com
8