Datasheet

446 | Switching and Control | Switching and Control Systems
Components
Equipment Rack
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction Metal cabinet
Finish Charcoal
Data Receiver Module (LTC 8916/01)
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 0.5 kg (1.1 lb)
Power Supply (LTC 8906/60 or LTC 8906/50)
Dimensions
(W x D x H)
67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11.5 lb)
Indicators Power On/Off and fuse alert LEDs
LTC 8903 Series Camera Input Bays
The LTC 8903/60 and LTC 8903/50 include the equipment rack,
LTC 8918/01 data receiver module, and LTC 8805 Series power supply.
Electrical
Model No. Rated Voltage Voltage
Range
Nominal Power
6
LTC 8903/60 120 VAC, 50/60 Hz 100 to 140 85 W
LTC 8903/50 220–240 VAC,
50/60 Hz
198 to 264 85 W
6 Power at rated voltage fully loaded.
Connectors
Video Inputs Sixteen (16), 34-pin ribbon connectors used in con-
junction with the LTC 8808/00 video interconnect
panel
Looping Video In-
put Connections
Sixteen (16), 34-pin ribbon connectors used with
LTC 8809/00 ribbon cables (supplied as required to
loop to additional LTC 8903 Series bays)
Video Bus
Connections
Four (4), 34-pin ribbon connectors interconnect
with LTC 8903 Series camera input bays using
LTC 8809/00 ribbon cables
Console Port reserved for future use
COM 1 Port reserved for future use
COM 2 Port reserved for future use
EXT SYNC BNC input used to synchronize unit to external sync
signal; accepts composite video, composite sync, or
the V Sync output provided from another LTC 8900
Series matrix bay
V SYNC BNC connector provides output signal to synchronize
an additional LTC 8900 Series matrix bay via its EXT
Sync input
External Data Inter-
face
Two (2), RJ-45 high-speed LAN ports for interface to
LTC 8901 main CPU bay via system LAN Switches
(Connected in parallel; one is used, one is reserved
for future use)
Components
Equipment Rack
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction Metal cabinet
Finish Charcoal
Data Receiver Module (LTC 8918/01)
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 0.5 kg (1.1 lb)
Power Supply (LTC 8805/60 or LTC 8805/50)
Size
(W x D x H)
67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11.5 lb)
Indicators Power On/Off and fuse alert LEDs
LTC 8921/00 Video Input Module
Use up to sixteen per LTC 8903 Series camera input bays.
Camera Inputs 32
Size
(D x H)
300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
LTC 8934/00 Video Output Module
Use up to eight per LTC 8902 Series monitor output bays.
Monitor Outputs 8
Dimensions
(D x H)
300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
LTC 8941/91 System Controller
(Redundant System Configurations Only)
Includes LTC 8943/94 PC, LTC 8944/93 Primary LAN Switch and
LTC 8945/93 Backup LAN Switch
LTC 8943/94 PC Rack-mount industrial-grade Pentium PC,
512 MB RAM (minimum), 8 GB solid state hard drive
(minimum), CD-/DVD burner, floppy drive, keyboard,
mouse, keyboard/mouse rack-mount shelf, and Win-
dows XP Professional; 120/230 VAC, 50/60 Hz
LTC 8059/00 Allegiant Master Control software (installed on PC)
Monitor
(UML-191-90)
48.3 cm (19 in.) LCD panel
120/230 VAC, 50/60 Hz
Monitor Rack
(UMM-LCDUB-RM)
Racked Height: 37.4 cm (14.7 in.)
Racked Width: 48.3 cm (19.0 in.)
LTC 8944/93 Pri-
mary LAN Switch
24-port 10/100Base-T Ethernet Switch with SNMP
Module, programmed with primary IP Address;
120/220 VAC, 50/60 Hz
LTC 8945/93
Back-Up LAN
Switch
24-port 10/100Base-T Ethernet Switch with SNMP
Module, programmed with back-up IP Address;
120/220 VAC, 50/60 Hz
LTC 8946/93 Expansion LAN Switch
24-port 10/100BaseT Ethernet Switch, no SNMP module; 120/220 VAC,
50/60 Hz
Bosch Security Systems B.V. www.boschsecurity.com
8