Datasheet

Switching and Control | Switching and Control Systems | 457
LTC 8786 Series RS-232 to
Biphase Converter
Features
For use with PC or other devices running user-
supplied video controller software
Provides up to 16 Bi-Phase control code outputs
Each output operates up to 8 devices in a daisy chain
Compact design
The LTC 8786 Series of data converters are designed to
convert Bosch "Receiver/Driver and AutoDome RS-232
Control Code Protocol" into Allegiant Bi-Phase control
code.
These units are specifically designed to transform a single
data output from a PC-based DVR (or a similar device)
into multiple control code outputs for operating
AutoDome cameras.
The Bosch "Receiver/Driver and AutoDome RS-232
Control Code Protocol" is a simplex RS-232 data format
designed to communicate with the Bosch line of receiver/
drivers, AutoDome cameras, LTC 8786 converters, and
other compatible accessory devices. Complete
information on the protocol can be obtained by
downloading the manual from the AutoDome section of
www.boschsecuritysystems.com.
The input RS-232 baud rate of the LTC 8786 Series is
fixed at 9600 baud, 1 stop bit, 8 data bits, no parity, and
no handshake. The LTC 8786 Series units can be
connected directly to the RS-232 serial port of a PC using
an industry standard null modem cable. If another
connection type is required, an interface cable can easily
be constructed using the supplied 9-Pin D connector.
Certifications and Approvals
Agency Certifications
EMC Immunity EN50130-4
EMC Emission EN55022-1, FCC Part 15, Class A
Safety
Converter CE, LVD 73/23/EEC
Power Supply Adapter CE, UL, CSA, TUV
Installation/Configuration Notes
Typical Configurations
Using PC as a Source of RS-232 Data
1 Typical PC with Video Capture Card(s) or Other Device Running User-
supplied Video/Control Software
2 RS-232 Data
3 Video Signal
4 LTC 8786 Converter
5 Up to 16 Bi-Phase Control Code Outputs
6 LTC 8786 Power Supply Adapter
7 Typical AutoDome Cameras or Allegiant Receiver/Driver Units
www.boschsecurity.com Bosch Security Systems B.V.
8