Datasheet

460 | Switching and Control | Switching and Control Systems
Bilinx Video Signal Presence One (1) green LED for each of 16 chan-
nels
Ethernet Port Green LED indicates link;
Yellow LED indicates activity
Rear Panel Controls
Group ID Three (3) rotary switches
Rear Panel Connectors
Bilinx Video Inputs 16 BNC connectors; accepts standard
NTSC/PAL baseband composite video sig-
nals or video signals from Bilinx-capable
cameras; 0.5–1.4 Vp-p; 75 Ohm termi-
nated; TVS protected inputs provide im-
proved protection against transients
Video Outputs Male 34-pin video ribbon connector; pro-
vides 16 video outputs (unity gain using
active circuitry); mating 2 m (6°ft) 16-
channel LTC 8809/00 cable included
Bi-Phase Data Interface 6-position removable terminal block with
"+"," –", and "shield" input connections
and "+"," –", and "shield" looping output
connections, with attached end-of-line
termination resistor
PC Interface Male 9-pin sub D-connector
RS-232 Data Interface
1
Female 9-pin sub D-connector for Alle-
giant RS-232 interface
RS-485 Data Interface
1
Female 9-pin sub D-connector for Alle-
giant RS-485 interface port connection
RS-485 ‘Looping’ Data Inter-
face
1
Female 9-pin sub D-connector, for data
interface to cascaded LTC 8016 unit
1.One (1), 2 m (6 ft) data interface cable is supplied for use with the Allegiant RS-232 inter-
face, the Allegiant RS-485 interface, or the cascade configuration looping connection.
Ethernet Interface RJ-45 connector, supporting
10/100 BaseT (reserved for future use)
Power Cord Two (2) detachable 3-wire IEC cords with
grounded plug, 1.83 m (6 ft.); one with
European continental plug type and one
with US plug type
Environmental
Temperature
Operating 0°C to 50°C (32°F to 122°F)
Storage –10°C to 70°C (14°F to 158°F)
Humidity 0% to 90% relative, non-condensing
Mechanical
Construction Steel chassis with sheet metal cover and
plastic bezel
Finish Charcoal case
Dimensions
(W x D x H)
440 x 305 x 40 mm (17.3 x 12 x 1.7 in.)
Weight 3.8 kg (8.5 lb)
Rack-mount Kit (included) For mounting unit in an EIA 48 cm (19 in.)
rack
Optional Accessories
LTC 8508/01 Ribbon-to-BNC Interface Cable
Interface cable with a 34-pin ribbon cable on one end and 16 male BNC
connectors on the other end. This cable is required when the LTC 8016
unit will be connected to control system devices that do not contain a 34-
pin ribbon cable connector.
LTC 8807/00 BNC Panel Interface panel used to convert video ribbon ca-
bles from up to two LTC 8016 units into 32 standard female BNC connec-
tors. Useful when the LTC 8016 unit will be separated from the control
unit beyond the 2 m (6 ft)distance allowed by the video ribbon cable sup-
plied with the unit.
LTC 4630, LTC 4631 Fiber Optic Series modules compatible with Bilinx
communication. Available in surface-mount and rack- mount models. Re-
fer to the LTC 4600 Series data sheet for complete information on these
products.
NV‑211 or NV‑214 A‑M BNC-to-twisted pair adaptors passive (non-ampli-
fied) devices compatible with Bilinx technology, allowing transmission of
real-time monochrome or color video over unshielded twisted pair (UTP)
telephone wire. Refer to the NV-214 A-M Series data sheet for complete
information on these products.
Compatibility
Allegiant Matrix Switchers Requires an Allegiant CPU firmware 8.6 or
later (released May 2004)
AutoDome Cameras All models manufactured October 2003
(version 5.11), or later
Dinion Cameras Dinion Series manufactured
March 2004, or later
Bi-Phase Devices Any product generating standard Allegiant
Bi-Phase Control Code protocol
Ordering Information
LTC 8016/90 Allegiant Bilinx Data
Interface
LTC 8016/90
Accessories
LTC 8508/01 Ribbon-to-BNC interface
cable
for LTC 8016, with a 34-pin ribbon cable on
one end and 16 male BNC connectors on the
other end, 1 m (3 ft)
LTC8508/01
LTC 8807/00 BNC Panel
32 channel video interconnect panel, for use
with up to 2 LTC 8809 video ribbon cables
LTC 8807/00
LTC 463x Fiber optics series
Fiber optic modules compatible with Bilinx
communication. Available in surface-mount
and rack- mount models. Refer to the
LTC 4600 Series Data Sheet for complete in-
formation on these products.
LTC463x
Bosch Security Systems B.V. www.boschsecurity.com
8