Datasheet

462 | Switching and Control | Switching and Control Systems
•
Offset the Biphase addresses to one of eight (8)
Diamond Electronics address blocks that support up
to 255 cameras each. In large systems, 8 translators
can be used to support up to 2,048 cameras.
•
Default iris mode can be set to either Auto or Manual.
LTC 8782/x0-11–Bosch Biphase to Javelin RS-232
The LTC 8782/x0-11 is a Biphase to Javelin code
translator to permit control of Javelin receivers from
Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Javelin RS-232
protocol. The translator supports 15 Javelin prepositions
and the ability to set Javelin camera movement limits.
LTC 8782/x0-04–Bosch Biphase to Kalatel RS-422
The LTC 8782/x0-04 is a Biphase to Kalatel code
translator to permit control of Kalatel receivers from
Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Kalatel RS-422
protocol. The translator can be programmed by internal
switches for the following:
•
Either Kalatel Digiplex III or Digiplex II code type can
be selected.
•
Offset the Biphase addresses to one of four (4) Kalatel
Digiplex II address blocks that support up to 96
cameras each. In large systems, four (4) translators
can be used to support up to 384 cameras.
•
Offset the Biphase addresses to one of 4 Kalatel
Digiplex III address blocks that support up to 256
cameras each. In large systems, four (4) translators
can be used to support up to 1024 cameras.
•
Support output baud rates of 2400 and 4167 for
Digiplex II, 2400 and 4800 for Digiplex III.
LTC 8782/x0-13–Bosch Biphase to Panasonic RS-485
The LTC 8782/x0-13 is a Biphase to Panasonic code
translator to permit control of Panasonic receivers from
Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Panasonic RS-485
protocol. The translator can be programmed by internal
switches for the following:
•
Offset the Biphase addresses to one of 32 Panasonic
address blocks that support up to 96 cameras each. In
large systems, 32 translators can be used to support
up to 3,072 cameras.
•
Support output baud rates of 2400, 4800, 9600, and
19.2K.
•
Support either variable or two fixed speed code.
LTC 8782/x0-10–Bosch Biphase to Pelco RS-422
The LTC 8782/x0-10 is a Biphase to Pelco code translator
to permit control of Pelco receivers from Biphase
controllers. It receives Biphase code and transmits the
appropriate commands in Pelco RS-422 protocol. The
translator can be programmed by internal switches for the
following:
•
Support either Pelco "P" or "D" output code.
•
Support up to 256 addresses in "D" code, and 16 or
32 addresses in "P" code.
•
Support Pelco output baud rate of 2400 in “D” code.
•
Support Pelco output baud rate of 4800 or 9600 in "P"
code.
•
Support Pelco "turbo speed."
LTC 8782/x0-12–Bosch Biphase to Philips RCL
The LTC 8782/x0-12 is a Biphase to Philips RCL code
translator to permit control of Philips RCL receivers from
Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Philips RCL
protocol. The translator can be programmed by internal
switches for either 50 Hz or 60 Hz RCL rates.
LTC 8782x03–Bosch Biphase to Sensormatic RS-422
The LTC 8782/x0-03 is a Biphase to Sensormatic code
translator to permit control of Sensormatic receivers from
Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Sensormatic
RS-422 protocol. The translator can be programmed by
internal switches for the following:
•
Offset the Biphase addresses to one of 32
Sensormatic address blocks that support up to 256
cameras each. In large systems, 32 translators can be
used to support up to 8,192 cameras.
•
Support "group" sizes of either 256 or 99.
•
Support either Sensormatic variable or two fixed
speed code.
LTC 8782/x0-01–Bosch Biphase to Vicon RS-422
The LTC 8782/x0-01 is a Bosch Biphase to Vicon code
translator to permit control of Vicon VPS system receivers
from Biphase controllers. It receives Biphase code and
transmits the appropriate commands in Vicon RS-422
protocol. The translator can be programmed by internal
switches for the following:
•
Offset the Biphase addresses to one of four (4) Vicon
address blocks that support up to 255 cameras each.
In large systems, four (4) translators can be used to
support up to 1,020 cameras.
•
Support output baud rates of 9600 or 4800.
"Others" to Bosch Biphase Code
LTC 8782/x0-22–American Dynamics Manchester to
Bosch Biphase
The LTC 8782/x0-22 is an American Dynamics to Biphase
code translator to permit control of Biphase receivers
from American Dynamics controllers. It receives American
Dynamics Manchester code and transmits the appropriate
commands in Biphase protocol. Supports full range of
Bosch Biphase Aux and preposition numbers. The
translator can be programmed by internal switches for the
following:
•
Offset the 64 camera American Dynamic address block
to one of 32 Biphase address blocks that support up
to 64 cameras each. In large systems, 32 translators
can be used to support up to 2,048 cameras.
•
Accept either fixed or variable speed American
Dynamics code.
•
Generate either fixed or variable speed Biphase code.
Bosch Security Systems B.V. www.boschsecurity.com
8