Datasheet

Switching and Control | Switching and Control Systems | 463
LTC 8782/x0-25–Diamond Electronics RS-422 to Bosch
Biphase
The LTC 8782/x0-25 is a Diamond Electronics to Biphase
code translator to permit control of Biphase receivers
from Diamond Electronics controllers. It receives Diamond
Electronics RS-422 code and transmits the appropriate
commands in Biphase protocol. The translator can be
programmed by internal switches to generate either fixed
or variable speed Biphase code.
LTC 8782/x0-31–Javelin RS-232 to Bosch Biphase
The LTC 8782/x0-31 is a Javelin to Biphase code
translator to permit control of Biphase receivers from
Javelin controllers. It receives Javelin RS-232 code and
transmits the appropriate commands in Biphase protocol.
The translator can be programmed by internal switches to
generate either fixed or variable speed Biphase code.
LTC 8782/x0-24–Kalatel RS-422 to Bosch Biphase
The LTC 8782/x0-24 is a Kalatel to Biphase code
translator to permit control of Biphase receivers from
Kalatel controllers. It receives Kalatel RS-422 code and
transmits the appropriate commands in Biphase protocol.
The translator will automatically detect the type of Kalatel
input code and indicate the type and baud rate on a front
panel LED indicator. Supports full range of Bosch Biphase
Aux and preposition numbers. The translator can be
programmed by internal switches for the following:
•
Generate either fixed or variable speed Biphase code.
•
Accept either fixed or variable speed Kalatel code.
LTC 8782/x0-30–Pelco RS-422 to Bosch Biphase
The LTC 8782/x0-30 is a Pelco to Biphase code translator
to permit control of Biphase receivers from Pelco
controllers. It receives Pelco RS-422 code and transmits
the appropriate commands in Biphase protocol. Supports
full range of Bosch Biphase Aux and preposition numbers.
The translator can be programmed by internal switches
for the following:
•
Generate either fixed or variable speed Biphase code.
•
Accept either Pelco "P" or "D" output code.
•
Support either 4800 or 9600 baud in Pelco "P" code.
•
Support 2400 baud in Pelco “D” code.
LTC 8782/x0-32–Philips RCL to Bosch Biphase
The LTC 8782/x0-32 is an RCL to Biphase code translator
to permit control of Biphase receivers from RCL
controllers. It receives Philips RCL code and transmits the
appropriate commands in Biphase protocol. The translator
can be programmed by internal switches for the following:
•
Generate either fixed or variable speed Biphase code.
•
Accept latching or normal Aux commands.
LTC 8782/x0-21–Vicon RS-422 to Bosch Biphase
The LTC 8782/x0-21 is a Vicon to Biphase code translator
to permit control of Biphase receivers from Vicon VPS
controllers. It receives Vicon RS-422 code and transmits
the appropriate commands in Biphase protocol. Supports
full range of Bosch Biphase Aux and preposition numbers.
The translator can be programmed by internal switches
for the following:
•
Generate either fixed or variable speed Biphase code.
•
Accept either fixed or variable speed Vicon code.
•
Support either 4800 or 9600 Vicon baud rates.
Certifications and Approvals
Power Supply
Product Safety Complies with CE regulations, UL,
CSA, EN and IEC Standards
LTC 8782 Series Translator
Electromagnetic Compatibility
(EMC)
Complies with FCC Part 15,
ICES-003 and CE regulations
Installation/Configuration Notes
Typical Biphase to “Others” Configuration
# Description
1 Bosch Controller Generating Biphase Code
2 Biphase Code
3 Power Supply
4 LTC 8782 Translator
5 “Others” Code Distribution
6 “Others” Control Code
7 “Others” Dome and P/T/Z Cameras
8 Bosch Dome Camera
9 “Others” Receiver/Driver
www.boschsecurity.com Bosch Security Systems B.V.
8