Datasheet

472 | Switching and Control | Switching and Control Systems
LTC 8807/00 Video Interconnect Panel
The LTC 8807/00 Video Interconnect Panel is identical to
the LTC 8808/00 described above, except that it does not
include the two video ribbon cables. This video
interconnect panel is intended for use with products that
are supplied with video ribbon cables, such as the
LTC 8016/90 Bilinx Data Interface unit.
For example, the ribbon cables from up to two LTC 8016
units can be converted into 32 standard female BNC
connectors using this interface panel. This configuration is
necessary when the LTC 8016 unit will be separated from
the control unit beyond a 2 m (6 ft) distance.
LTC 8809 Series Video Ribbon Cables
The LTC 8809 series are 16-channel video ribbon cables
that are used to provide connections between certain
devices. Specifically designed for the transport of 75 Ohm
video signals, these cables are available in three different
lengths:
Model Number Length
LTC 8809/00 2 m (6 ft)
LTC 8809/01 1 m (3 ft)
LTC 8809/02 3.2 m (10.5 ft)
Each cable contains a 34-pin connector at each end that is
designed to ‘lock’ into the corresponding connector found
on the rear panels of the Allegiant LTC 8800 and
LTC 8900 series matrix switchers. In addition, these
cables are supplied with certain other products, including
the LTC 8808/00 Video Interconnect Panel and the
LTC 8016/90 Bilinx Data Interface unit.
LTC 8506/00 Allegiant Console Cable
The LTC 8506/00 is an RS-232 grade cable with 9-pin, Sub
D-connectors on each end that is used to connect an
Allegiant’s system’s Console port to a standard PC Com
port. This cable is included in the Allegiant LTC 8059
Master Control Software and the LTC 8850 Allegiant GUI
packages.
Length: 3 m (10 ft), approximately.
LTC 8508/01 Ribbon-to-BNC Interface Cable
The LTC 8508/01 is a video interface cable with a 34-pin
ribbon cable on one end and 16 male BNC connectors on
the other end. This cable can be used to loop up to 16-
channels of video signals from products having the ribbon
cable connector interface to other devices that utilize BNC
connectors. Typical products with 34-pin ribbon cable
connector interfaces include the LTC 8016/90 Bilinx Data
Interface unit and the DESA
XL
series digital video
recorder.
Length: 1 m (3 ft), approximately
Ordering Information
LTC 8555/00 Compact Full-function
Keyboard
variable speed joystick
LTC 8555/00
LTC 8555/01 Compact Full-function
Keyboard
variable speed joystick, icon graphics
LTC 8555/01
LTC 8555/02 Compact Full-function
Keyboard
variable speed joystick, RS-232 protocol
LTC 8555/02
LTC 8555/03 Compact Full-function
Keyboard
variable speed joystick, RS-232 protocol,
icon graphics
LTC 8555/03
LTC 8540/00 Alarm Interface Unit
Alarm interface, 64 alarm inputs, 8 relay clo-
sures
LTC 8540/00
LTC 8558/00 Keyboard Cable
optional, 30.5 m (100 ft)
LTC 8558/00
LTC 8568/00 Signal Distribution Unit
32 separate biphase outputs
LTC 8568/00
LTC 8768/00 Signal Distribution Unit
64 separate biphase outputs
LTC 8768/00
LTC 8569/50 Code Merger Unit
allows 2 Biphase devices to control 32 out-
puts, 230 VAC, 50 Hz
LTC 8569/50
LTC 8569/60 Code Merger Unit
allows 2 Biphase devices to control 32 out-
puts, 120 VAC, 50/60 Hz
LTC 8569/60
LTC 8570/50 Code Merger Unit
allows 4 Biphase devices to control 32 out-
puts, 230 VAC, 50 Hz
LTC 8570/50
LTC 8570/60 Code Merger Unit
allows 4 Biphase devices to control 32 out-
puts, 120 VAC, 50/60 Hz
LTC 8570/60
LTC 8571/50 Code Merger Unit
allows 2 Biphase devices to control 64 out-
puts, 230 VAC, 50 Hz
LTC 8571/50
LTC 8572/50 Code Merger Unit
allows 4 Biphase devices to control 64 out-
puts, 230 VAC, 50 Hz
LTC 8572/50
LTC 8572/60 Code Merger Unit
allows 4 Biphase devices to control 64 out-
puts, 120 VAC, 60 Hz
LTC 8572/60
LTC 8712/50 Allegiant Console Port
Expander
for LTC 8600/LTC 8800 console port ex-
pander, RS-232, 230 VAC, 50 Hz
LTC 8712/50
LTC 8712/60 Allegiant Console Port
Expander
for LTC 8600/LTC 8800 console port ex-
pander, RS-232, 115 VAC, 60 Hz
LTC 8712/60
LTC 8713/50 Alarm Port Expander
for up to 4 LTC 8540/00 units, half rack,
230 VAC, 50 Hz
LTC 8713/50
LTC 8713/60 Alarm Port Expander
for up to 4 LTC 8540/00 units, half rack,
115 VAC, 60 Hz
LTC 8713/60
Bosch Security Systems B.V. www.boschsecurity.com
8