Datasheet

498 | Switching and Control | Switchers, Quads, and Multiplexers
Certifications and Approvals
Electromagnetic Com-
patibility (EMC)
Complies with FCC Part 15, ICES-003 and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN and
IEC Standards
Installation/Configuration Notes
Typical Installation Using LTC 5108 Series Switcher
1 Motion Detector 5 Additional Cameras
2 Door Switch 6 Alarm Output Relay Closure
3 Smoke Detector 7 Video Recorder
4 To Terminated Auxiliary Moni-
tor or Terminated Switcher
8 Cameras
Monitor A
Sequencing Mode
1. Normal sequencing of camera inputs
Blanking Mode
1. Normal sequencing of camera inputs
Monitor B
Sequencing Mode
1. Normal sequencing (same as Monitor A)
2. “HOLD” condition
3. “ALARM” condition
Blanking Mode
1. Blank screen
2. “HOLD” condition
3. “ALARM” condition
Technical Specifications
Electrical
Model No.
1
Rated Voltage Voltage
Range
Power at
Rated Voltage
LTC 5104/60 120 VAC,
50/60 Hz
105 to 130 4 W
LTC 5104/50 230 VAC,
50/60 Hz
198 to 264 4 W
LTC 5108/60 120 VAC,
50/60 Hz
105 to 130 4 W
LTC 5108/50 230 VAC,
50/60 Hz
198 to 264 4 W
1) Models shown are for English on-screen menus model.
Switching Time Less than 1 µs
Dwell Time Each camera individually or globally set from
1 sec. to 64 sec.
Alarm Dwell Time 1 sec. to 64 sec.
Alarm Capture Time 1 sec. to 63 sec.
Video Gain Unity
Bandwidth (–3 dB point)
5 MHz minimum
Differential Gain 1% typical
Differential Phase 1°
Video Crosstalk (Input to Input Isolation)
–50 dB typical at 3.58 MHz
Video Feedthrough (Input to Output Isolation)
–65 dB typical at 3.58 MHz
Memory Back-Up Nonvolatile memory back-up
Controls
Front Panel Momentary Push Button Controls: DWELL,
SKIP/CLR, ALARM, RUN/NEXT, each video in-
put
Internal Video input has automatic termination
Indicators ALARM, RUN/NEXT, each video input
Titling 16 character camera titling
Connectors
Video Inputs
0.5 Vp-p to 2 Vp-p
LTC 5104 Series Four (4) inputs; 8 BNC connectors
LTC 5108 Series Eight (8) inputs; 16 BNC connectors
Video Outputs
LTC 5104 Series One (1), BNC 75 Ohm
LTC 5108 Series Two (2), BNC 75 Ohm
Alarm Inputs
LTC 5104 Series Four (4)
LTC 5108 Series Eight (8)
Bosch Security Systems B.V. www.boschsecurity.com
8