Datasheet

Cameras, PTZ | AutoDome® Modular Accessories | 41
AutoDome Modules and
Accessories
Features
▶
Interchangeable Central Processing Unit (CPU),
Camera, Housing and Communications modules
▶
Analog and Hybrid (analog/IP) Communications
module options
▶
24 VAC, 120 VAC, and 230 VAC Power Supply Units
with an optional Fiber Optic Module
▶
Roof, Pipe, and Pendant Arm Mounting Systems
▶
Analog and IP Fiber Optic Communication Units
▶
Rugged Polycarbonate and High-resolution Acrylic
Bubble Options
The Bosch AutoDome modular camera system is a
revolutionary new concept in dome cameras. The entire
AutoDome system is based on five interchangeable
modules: the Central Processing Unit (CPU), camera,
housing, communications, and power supply. Simply swap
one of the AutoDome’s interchangeable modules and
quickly upgrade from analog to IP, color to day/night, or
add motion detection, and AutoTrack. Never before have
you had the ability to adapt a security system to your
changing needs this quickly or inexpensively.
The Bosch AutoDome also features a selection of power
supply and mounting accessories with clear or tinted
bubbles.
Interchangeable modules
Five interchangeable modules allow you to update camera
functionality quickly and cost-effectively. Using common
components lets you install a basic camera system today
and migrate to a more advanced version tomorrow –
without having to replace the entire dome, thus protecting
your initial investment.
By using the same housing components, all installations
have a consistent look, and observers have no idea which
type of camera (if any) is watching over them. This
unique, modular design also gives you the flexibility to
move cameras between different housings when special
coverage is needed, or as site plan requirements change.
For example, an 18x PTZ camera over a specific area
could easily be “hot-swapped” to a 26x day/night without
removing the power. AutoDome’s Ethernet
communications module allows you to add IP functionality
while maintaining connectivity to existing analog inputs
and outputs.
Functions
CPU Modules
100 Series CPU Module
The 100 Series CPU module provides fixed camera
functionality, “hotswap” camera module replacement,
pluggable communications module upgrades, and built-in
surge suppression.
200 Series CPU Module
The 200 Series CPU module delivers fast 360° per second
pan/tilt/zoom speeds, “hotswap” camera module
replacement, pluggable communications module
upgrades, built-in surge suppression, advanced
diagnostics, and multilingual displays.
This module supports 64 pre-positions and a single preset
tour. The preset tour has the capacity for up to 64 pre-
positions with a configurable dwell time between pre-
positions.
300 Series CPU Module
The 300 Series CPU module includes all of the features of
the 200 Series plus additional presets and tours, cable
compensation to extend cabling distances, and third-party
protocol support. The Advanced Series also supports
privacy masking and advanced alarm handling via a built-in
rules engine.
500i Series CPU Module
The 500i Series CPU module includes all of the features of
the 300 Series plus AutoTrackII motion tracking and video
motion detection.
Camera Modules
High-performance Fixed Camera
The high-performance fixed cameras have a 1/3-inch
interline CCD with Bosch’s unique 15-bit Dinion digital
imaging technology to deliver a 32-fold sensitivity
improvement and a full 540 horizontal lines of resolution.
Available in color and day/night versions, these cameras
incorporate a number of features not found in other fixed
dome cameras.
www.boschsecurity.com Bosch Security Systems B.V.
1