Datasheet

Switching and Control | Digital Motion Detectors | 503
VMD01‑Mx0 Series Digital
Motion Detector
Features
▶
Intelligent digital video motion detector
▶
Detects, tracks and stores motion images
▶
Automatic self-adaptation to changing environmental
conditions
▶
Maximizes detection rate and reduces unwanted
alarms
▶
Stand alone or system integration
▶
Intuitive graphical interface for fast effective set up
Whenever you need reliable video motion detection, for
indoor or outdoor use, the Bosch VMD01 is the unit of
choice. The VMD01 is an intelligent digital motion
detector that uses advanced video content analysis to
reliably detect moving objects while suppressing
unwanted alarms from spurious sources in the image. The
unit intelligently adapts to changing lighting and
environmental conditions such as rain, snow and leaves
blowing in the wind.
The VMD01 can easily be configured to select the
sensitive areas of the image, the minimum object size and
the motion direction that will trigger an alarm, so that it
only detects the important moving objects in a scene. A
graphical display allows the sensitive area, size and
perspective for objects, and movement direction to be
simply drawn on the image. Once movement has been
detected, the object causing the alarm is outlined on the
screen, the motion tracked on the monitor, and pre and
post alarm images are stored. The alarm condition can be
signaled by means of a standard relay output and LED on
the unit. The stored alarm images can be replayed on the
monitor using the front panel rotary switch or by remote
control.
Certifications and Approvals
Electromagnetic Com-
patibility (EMC)
Emission: EN50081-1, EN50130-4,
EN50130-5, According FCC, UR
Safety EN 60950
Parts Included
Quantity Component
1 VMD01
4 Rubber feet for table top mounting
Technical Specifications
Electrical
Power Supply
Type
VMD-PS90 External plug power adapter
VMD-RA90/VMD-RA00 Integrated in a 48 cm (19 in.) rack
VMD01-M50 VMD01-M60
Operating Voltage 5 VDC, 50 Hz 5 VDC, 60 Hz
Power Consumption 6 W 6 W
Connection RJ-12 (+5 V to 1.2; GND to 4.6)
Video
Input 1 x BNC, VMD01-M50: PAL/CCIR, VMD01-
M60: NTSC/EIA, 75 Ohm (internal termina-
tion),
1 Vp-p (0.5–2.0 Vp-p)
Output 1 x BNC, VMD01-M50: PAL/CCIR, VMD01-
M60: NTSC/EIA, 1 Vp-p; live images, live
images with outlined objects, stored alarm
images, GUI for setup
Contacts
Input Internal pull up to ground;
1: Arm/disarm sensor
2: Toggle parameter set
Output Open collector, 100 mA, 12 V
1: Object detection; adjustable at peak, pe-
riodic peak or as long as object is detected
2: Video signal supervision
Relay
Output 30 V max., 1.0 A;
1: System/common failure
(break contact);
2: Object detection, until reset (minimal for
1 second)
LED
Conditions Indicated 1: (Green) power on, system failure
2: (Red) detector armed, video loss, or ob-
ject detected
Serial Port
Type RS-232, 115 k Baud max. (for back-up
purposes, connection of mouse)
www.boschsecurity.com Bosch Security Systems B.V.
8