Datasheet

564 | Digital Recording and Storage | Disk Arrays (Network Attached)
Electrical requirements
Input voltage: 200 to
240 V
Worst case, single PSU System, two PSUs
•
input current
measured
1.63 A 1.60 A
•
input power
measured
323 W 309 W
•
thermal dissipa-
tion
1103 BTU/h 1054 BTU/h
Input power frequency 50 to 60 Hz 50 to 60 Hz
System hardware specifications
Chassis 3U, 19”-rack-mountable
Power supplies Dual redundant, hot pluggable
Max disk drives 14 x 1 TB SATA‑II drives
Max net capacity ~7600 GB
Shelf connectivity Fibre Channel:
•
copper
•
fiber
Mechanical
Dimensions (H x W x D) 113 x 447 x 552 mm
(5.25 x 17.6 x 22 in)
Weight 30.8 kg (68 lb), fully loaded
Space requirements
Front—cooling 153 mm (6 in)
Rear—cooling 305 mm (12 in)
Front of chassis—maintenance 559 mm (25 in)
Rear of chassis—maintenance 305 mm (12 in)
Environmental
Operating temperature +5 °C to +40 °C (+41 °F to +104 °F)
Non-operating temperature -40 °C to +60 °C (-40 °F to +140 °F)
Relative humidity 20 to 80%, non-condensing
Acoustic level 58 dBA at +23 °C
Notes:
•
General technical specifications for the RAID system
are provided in the NetApp Site Requirements Guide
(Part number 215-04823_A0, August 2009) and on
http://www.netapp.com/us/products/storage-
systems/fas2000/fas2000-tech-specs.html (last access
September 17, 2009).
NetApp is a registered trademark of NetApp; RAID‑DP and Data ONTAP
are trademarks of NetApp, all rights reserved. All data and dimensions
are referenced from the NetApp Site Requirements Guide and from the
NetApp Website and are subject to change without notice.
Ordering Information
DSA-N2B40-12AT
Base unit with 12 x 1 TB SATA hard disk
DSA-N2B40-12AT
DSX-N2X00-14AT
Shelf expansion unit, 14 x 1 TB hard disk
DSX-N2X00-14AT
DSA-NDTK-100A
1 TB hard disk drive
DSA-NDTK-100A
DSA-N2B40-AUG
Second controller upgrade
DSA-N2B40-AUG
DSX-N2X00-14AT
Shelf expansion unit, 14 x 1 TB hard disk
DSX-N2X00-14AT
Bosch Security Systems B.V. www.boschsecurity.com
9