Datasheet

Encoders/Decoders | Modular Systems | 595
Technical Specifications
Base Systems
Power supply
Input voltage 12 VDC, redundant (dual inputs)
Power consumption 50 VA max, fully equipped
Network
VIP‑X1600‑XFB
Ethernet Triple port (2 front, 1 rear)
10/100/1000 Base‑T, auto sensing, half/full du-
plex, RJ45
SFP 1 Gbps SFP (small form-factor pluggable) slot at
front
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,
DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,
SNTP, SNMP (V1, MIB‑II), 802.1x, RSTP
Network VIP‑X1600‑B
Ethernet Dual port (1 front, 1 rear) 10/100/1000 Base‑T,
auto sensing, half/full duplex, RJ45
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,
DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,
SNTP, SNMP (V1, MIB‑II), 802.1x, RSTP
Mechanical
Dimensions (H x W x D) 44 x 440 x 210 mm (without brackets)
(17.3 x 8.3 x 1.7 in)
Color Charcoal
Weight Approx. 4.0 kg (8.4 lb) with 4 modules
Environmental
Operating temperature 0 °C to +50 °C (+32 °F to +122 °F)
Storage temperature 0 °C to +50 °C (+32 °F to +122 °F)
Relative humidity 0 to 95%, non-condensing
Thermal value 170 BTU/h max
H.264 Encoder Modules (VIP‑X1600‑XFM4A/XFM4B)
Input/output
Video 4 x input
connector
BNC
impedance
75 ohm, switchable
signal
Analog composite, 0.7 to 1.2 Vpp , NTSC or PAL
Audio 2 x mono line in, 1 x mono line out
connector
2 x 3.5 mm stereo jack
signal line in
9 kohm typical, 5.5 Vpp max
signal line out
3.0 Vpp at 10 kohm/1.7 Vpp at 16 ohm typ.
Alarm 4 x input
connector
Clamp (non-isolated closing contact)
activation resist-
ance
10 ohm max
Relay 1 x output
connector
Clamp
signal
30 Vpp (SELV), 0.2 A
COM port Clamp, RS‑232/422/485
Video
Standards H.264 MP, H.264 BP+ (ISO/IEC 14496‑10)
M‑JPEG
Data rates 9.6 kbps to 6 Mbps per channel (MP)
9.6 kbps to 2.5 Mbps per channel (BP+)
Resolution Horizontal x vertical PAL/NTSC
4CIF/D1
704 x 576/480 (25/30 ips)
CIF
352 x 288/240 (25/30 ips)
GOP structure I, IP, IPBB
Overall IP delay 120 ms
Dual streaming Independently on all channels
Frame rate 1 to 50/60 (PAL/NTSC)
Audio
Standard G.711; 300 Hz to 3.4 kHz
Data rate 80 kbps at 8 kHz sampling rate (mono channel)
Network
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,
DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP,
SNTP, SNMP (V1, MIB‑II), 802.1x
Encryption TLS 1.0, SSL, AES (optional)
Control
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
Environmental
Operating temperature 0 °C to +40 °C (+32 °F to +104 °F)
Storage temperature 0 °C to +50 °C (+32 °F to +122 °F)
Relative humidity 0 to 95%, non-condensing
MPEG‑4 Encoder Modules (VIPX1600M4S/M4SA)
Input/output
Video 4 x input
connector
BNC
impedance
75 ohm, switchable
signal
Analog composite, 0.7 to 1.2 Vpp , NTSC or PAL
Audio (audio version
only)
4 x mono line in
connector
2 x 3.5 mm stereo jack
signal
9 kohm typical, 5.5 Vpp max
Alarm 4 x input
connector
Clamp (non-isolated closing contact)
activation resist-
ance
10 ohm max
Relay 4 x output
connector
Clamp
signal
30 Vpp (SELV), 2 A
COM port Clamp, RS‑232/422/485
www.boschsecurity.com Bosch Security Systems B.V.
10