Datasheet

Management Systems | Bosch Video Management System | 599
Technical Specifications
System Specifications
Maximum number of workstations
simultaneously viewing the same
camera
Multicast: 20
Unicast: 5
Supported languages English, German, Dutch, Italian, Por-
tuguese, French, Spanish, Simpli-
fied Chinese, Traditional Chinese,
Russian, Hungarian, Japanese,
Czech, Danish, Finnish, Greek, Nor-
wegian, Polish, Swedish, Thai, Turk-
ish, Korean, and Arabic
Anti-Virus software must not perform a full-scan. Performance may de-
crease depending on configuration.
Event reaction time <1 second, assuming sufficient net-
work bandwidth
Alarm reaction time (incl. 1 live Im-
age pane, 1 instant playback Image
pane and 1 map Image pane):
Maximum 2 seconds, assuming suf-
ficient network bandwidth
Bandwidth requirements Min. 1 Gbps for connections be-
tween:
Operator Client to Central Server
Operator Client to NVR/VRM/DiBos
Central Server to NVR/VRM/DiBos
Required open ports
Connection from Central Server and Client Workstations to NVRs:
Two selectable TCP ports (default 5390 and 5391)
Connection to Operator Client Workstations by BVMS SDK:
One selectable TCP port (default 5394)
Connection from Central Server to SMTP (for email notifications):
TCP Port 25
Connection to Bosch encoders and decoders:
Control channel: TCP ports 80 and 1756
Network scan: UDP ports 1757 and 1758
Multicast detection: one selectable UDP port (default 1900)
Multicast video transmission:
For each encoder audio or video stream, 1 selectable UDP port
Unicast UDP transmission: UDP ports dynamically assigned in the range
from 1024 to 65000
Connection to DiBos DVRs (uses DCOM):
TCP Port 135 plus four TCP ports and four UDP ports dynamically as-
signed in the range from 1025 to 65535
Central Server Specifications
Maximum number of sustained
events
For highest performance server,
e.g. MHW- SL5M4:
5,000 events/s at peaks
2,500,000 events/h received
500,000 events/h thereof written
to the system log (Logbook)
Central Server Redundancy Available with hardware and soft-
ware solutions upon request. Please
contact Bosch Design Engineer for
all redundancy solutions.
Maximum number of Task Sched-
ules
200
NVR Specifications
Maximum number of cameras and data rate per NVR,
for advanced performance server, e.g. MHW-SM5M2 and Bosch
DVA-8K,DVA-16K (AV multistream on, rebuild priority low)
Continuous or motion or alarm re-
cording and 4 playback clients with
4 Image panes each:
64 cameras @ 25 IPS / 4 CIF /
2 Mbps
Continuous (1IPS) and motion or
alarm recording and 4 playback cli-
ents with 4 Image panes each:
Continuous recording:
64 cameras @ 1 IPS / 2 CIF /
1,5 Mbps
Motion or alarm:
64 cameras @ 25 IPS / 4 CIF /
2 Mbps
Motion with pre-motion and alarm
with pre-alarm recording and 4
playback clients with 4 Image panes
each:
Pre-motion / alarm recording:
64 cameras @ 1 IPS / 2 CIF /
1,5 Mbps
Motion / alarm:
64 cameras @ 25 IPS / 4 CIF /
2 Mbps
Redundancy Failover NVR can be assigned to
take over for a failed NVR. Multiple
Primary NVRs can be assigned to the
same Failover NVR. Redundant NVR
can be assigned to a Primary NVR.
Maximum number of Primary NVRs
serviced by a Failover NVR
2
Maximum number of NVRs per Cen-
tral Server
2
For higher camera numbers use
VRM.
Device compatibility H.264 encoders and cameras are
not supported.
VRM Specifications
Maximum count of VRM servers per
Central Server
5
Maximum data rate per iSCSI For Bosch DVA-12TK:
200 Mbps
Maximum IP cameras/encoders per
iSCSI
For Bosch DVA-12T:
48 concurrent iSCSI connections
For Bosch-NetApp DSA Series:
NetApp 2020 and NetApp 2050:
128 concurrent iSCSI connections
NetApp 2040:
256 concurrent iSCSI sessions
Maximum number IP cameras/en-
coders channels per Central Server
500
Max. number of Replay Sessions 32
Minimum Client Workstation PC Requirements
Operation System Windows XP Professional, Service
Pack 3 (32-bit only)
CPU Intel Core 2 Duo 2.66 GHz or great-
er
RAM 2 GB or greater
Free disk space 500 MB
Network card 1000Base-T
www.boschsecurity.com Bosch Security Systems B.V.
11