Datasheet

Cameras, PTZ | AutoDome® Modular Accessories | 51
The built in web server allows authorized access using a
standard web browser, such as internet Explorer,
eliminating the need to install special viewing software.
Audio
The AutoDome TCP/IP Communications Module provides
integrated one-way audio support. This support allows the
user to remotely monitor audio from the camera site
directly over the network. Bosch enables video and audio
to be relayed as a single media stream so the two are
synchronized.
iSCSI device support
Built-in iSCSI support allows a network-enabled
AutoDome to stream video directly to an iSCSI RAID array.
This enables local video storage just like a conventional
DVR without streaming high bandwidth video across the
network. Local recording, or Recording at the Edge,
minimizes bandwidth usage and makes system recording
performance totally independent from network
performance.
Alarm management
The TCP/IP Communications Module extends AutoDome’s
powerful, flexible alarm management system even further.
An AutoDome equipped with the optional network module
can be configured to send alarm notifications via e-mail.
Each e-mail notification contains a text description of the
alarm as well as a digital image of the event.
Network-based control and configuration
The AutoDome TCP/IP Communications Module enables
full camera control and configuration capabilities over the
network. Operators or technicians can control camera
pan/tilt/zoom operation, presets, tours, and alarm
management functions virtually anywhere without need
for additional wiring.
The embedded web server on the Communications
Module lets the installer access all the user settings, make
camera adjustments, and update firmware via a standard
web browser.
The AutoDome TCP/IP Communications Module supports
the Bosch Divar XF, Video Recording Manager VRM, Vidos,
and the Bosch Video Management System.
Viewing
View the AutoDome IP video on a PC using a Web
browser, in the Bosch Video Management System, or
integrate it into another video management system.
The AutoDome TCP/IP Communications Module is also
used with VASA—Bosch’s hybrid IP integration software—
offering Allegiant IntuiKey users the ability to view an
Allegiant camera or one from an IP-based system.
Device management
Simple Network Management Protocol (SNMP) support
facilitates the remote monitoring and management. The
TCP/IP Communications Module provides full support for
SNMP v3.
Certifications and Approvals
Electromagnetic Com-
patibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Technical Specifications
Parts Included
Quantity Component
1 TCP/IP Communications Module
Electrical
Compression Standards H.264 (ISO/IEC 14496‑10), M‑JPEG,
JPEG
Video Data Rate 9.6 Kbps–6 Mbps
constant and variable
Video Resolution 704x576/480 (4CIF; 25/30IPS)
352x288/240 (CIF; 25/30IPS)
GOP Structure I, IP, IPBB
Overall Delay (IP) 240 ms
Frame Rate 1-25/30 IPS (PAL/NTSC)
Field/frame based coding
Network Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP,
SMTP, SNTP, SNMP, RTSP, 802.1x, iSCSI,
DynDNS, UPnP
Ethernet 10/100 Base-T, auto sensing, half/full du-
plex, RJ45
Audio Line In* 9 K Ohm typ, 5.5 Vp-p max
* With Ethernet models, the bi-phase ± can optionally be used as the
audio line in connector.
Software Control
Unit Configuration Via Microsoft Internet Explorer 7.0 Web
browser or higher, Divar XF, Vidos, or
Configuration Manager
Software Update Flash ROM, remote update
Environmental
Input Voltage Supplied by AutoDome
Power Consumption 4 W in addition to AutoDome
Weight Approx. 0.17 kg (0.37 lb)
Operating Temp. Depends on specific AutoDome model con-
figuration
www.boschsecurity.com Bosch Security Systems B.V.
1