Datasheet

Video Transmission Systems | Fiber Optic Video Transmission | 707
Electrical
Power
•
Supplied Power
Pack
Input: 90–264 VAC, 50/60 Hz
Output: 9 VDC @ 1 A
•
Module:
8-15 VDC @ 220 mA
Current Protection Automatic resettable
Solid-state current limiters
Circuit Board Meets IPC Standard
Mechanical
Dimensions (LxWxH) 16.0 x 13.0 x 2.8 cm (6.3 x 5.1 x 1.1 in.)
Shipping Weight 0.91 kg (2 lb)
Environmental
MTBF > 100,000 hours
Operating Temperature –40° C to +75° C (–40°F to +167°F)
Storage Temperature –40° C to +85° C (–40°F to +185°F)
Relative Humidity 0% to 95% (non-condensing)
Regulatory Compliance
X, cUL, UL, RoHS
Section 3: SFP Modules
Description Interchangeable modules available for use
with MMF or SMF optical fiber.
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Mechanical
Dimensions (LxWxH)
•
SFP-2 and SFP-3
55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
•
SFP-23, SFP-24,
SFP-25, SFP-26
63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP modules) 0.23 kg (.05 lb)
Type Connector Wavelength
(transmit/receive)
Max.
Distance
SFP-2 MMF Duplex LC 1310 nm /
1310 nm
2 km (1.2 miles)
SFP-3 SMF Duplex LC 1310 nm /
1310 nm
20 km (12.4 miles)
SFP-23 SMF Single SC 1310 nm /
1550 nm
60 km (37.3 miles)
SFP-24 SMF Single SC 1550 nm /
1310 nm
60 km (37.3 miles)
SFP-25 MMF Single SC 1310 nm /
1550 nm
2 km (1.2 miles)
SFP-26 MMF Single SC 1550 nm /
1310 nm
2 km (1.2 miles)
Fiber Compatibility
Optical Fiber Compatibility,
MMF
60/125 µm MMF. For 50/125 µm fiber,
subtract 4 dB from the specified optical
budget value. Must meet or exceed fiber
standard ITU-T G.651.
Optical Fiber Compatibility,
SMF
8–10/125 µm SMF. Must meet or exceed
fiber standard ITU-T G.652.
Optical Distance Specifica-
tions
Specified transmission distances are lim-
ited to the optical loss of the fiber and any
additional loss introduced by connectors,
splices, and patch panels. The modules
are designed to operate over the entire
optical loss budget range, so they do not
require a minimum loss in order to oper-
ate.
Section 4: C1-IN Rack Mount Card Cage
Description Rack mount card cage designed to hold a maxi-
mum of 14 CNFE2MC/IN modules
LED Indicators
Power
•
Red
Power is supplied
•
No LED lit
No power
Electrical
Input Voltage 90–264 VAC at 1 A maximum
Output Voltage 9 VDC ± 5% at 6.5 A at 75°C (167°F)
Fusing 1.25 A slow blow (rack power supply)
(plug-in modules individually electronically
fused)
Power Indicator Red LED
AC Line Cord Detachable, IEC-connected. US, European, and
UK power cords supplied.
Mechanical
Dimensions (LxWxH) 48 x 19 x 15 cm (19.0 x 7.5 x 6.0 in.)
Rack Slots Fourteen (14) 1-in. slots available
Shipping Weight 3.4 kg (7.5 lb)
Environmental
MTBF >100,000 hours
Operating Temperature –40° C to +75° C (–40°F to +167°F),
ambient
Storage Temperature –40° C to +85° C, (–40°F to +185°F),
ambient
Heat Generation 240 BTU
Regulatory Compliance
FCC part 15, X, cUL, UL, RoHS
www.boschsecurity.com Bosch Security Systems B.V.
13