Datasheet

ManualsBrandsBosch ManualsSecurity CamerasVEZ-211-IWCS

Cameras, PTZ | MIC series - Ruggedized PTZ Cameras | 79

36x Optical Zoom Module

Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to

F4.5

Zoom 36x optical (12x digital)

Angle of view 57.8° (wide) to 1.7° (tele)

Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical,

F1.6, 50IRE)

0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,

50IRE)

ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s

PAL)

Shutter speed 1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to

1/10,000 s (20 steps) PAL

IR Illuminators

LED array High efficiency Surface Mount (SMT) LEDs

No. of LEDs 7 per lamp

Wavelength 850 nm (semi-covert)

Beam angle 30º

IR distance 55 m (180 ft)

Weather proofing IP68

Construction material Aluminium with acrylic front window

Power consumption 9 W nominal per lamp on full power, 18 W total

for twin IR

Current 700 mA per lamp

Operational

Auto flip Yes

Manual flip Yes

Dynamic privacy zones 3D privacy masking with infinite zones (some

models, see ordering guide).

Presets 64 telemetry presets utilizing resolver technol-

ogy (using FV protocol, 10 camera set-up pre-

sets to allow ANPR, color correction etc.)

Preset tours 6 tours each with up to 32 presets

Sector titles Yes (64 sectors) 20 characters per title

Preset titles 20 character caption for each of the 64 pre-

sets

Home position Preset 1 or tour

Communication and Protocols

Communication RS485 / RS422

Control protocol Bosch or FV protocol cameras available; addi-

tional protocols supported are Pelco D, Kala-

tel, 360 Vision, American Dynamics, Panason-

ic, Molynx, VCL, and Vicon.

These can be loaded using the MIC-

USB485CVTR signal converter and Cam-set

via a PC.

Biphase control requires a Biphase to RS485

converter (MIC-BP3, available separately) to

connect to Biphase equipment.

Connectivity

Video Co-axial via composite cable

Telemetry Twisted pair. Simplex, half and full duplex op-

eration via composite cable

MIC Universal Camera

Setup Software Utility

(Cam-set)

Supplied with each camera, Cam-set allows di-

rect connection to a USB equipped PC via the

MIC Series PSU or over a full duplex or IP net-

work to provide access to all camera functions

and useful diagnostic tools

USB to RS485 signal con-

verter

Allows MIC Series cameras to connect to a PC

(supplied free with MIC Series 400 Infra-red

camera, or available separately)

Power Via composite cable

Alarms

Alarm inputs 1 tamper input (4 alarm inputs available via

the IR power supply unit)

Alarm communication Tamper switch (ground connection)

Mechanical

Drive unit Brushless, integral pan/tilt motor drive

Pan angle 360° continuous rotation

Pan speed Up to 90° per second (variable)

Tilt angle 186.6°

Tilt speed 0.2° to 90° per second (variable)

Speed control Closed loop electronics

Preset accuracy Better than 0.08°

Proportional Pan/Tilt to

Zoom

Yes

Construction

Construction material Machined aluminum

Viewing window Tempered flat glass

Window wiper Standard, long-life silicone wiper

Standard colors Black(RAL9005), Gray (RAL7001) or White

(RAL9003)

Standard finish Alochrom 1200 surface treatment with pow-

der coat paint.

Dimensions (WxHxD) 403 x 360 x 165 mm

(15.2 x 14.2 x 6.5 in.)

(upright and inverted)

403 x 330 x 217 mm

(15.2 x 13 x 8.5 in.)

(canted)

Weight 6.5 kg (14.3 lb) including 4-in. pitch circle di-

ameter (PCD) base

Configurations available Upright mount or upright canted at 45° mount.

(Inverted mount is possible using software set-

ting and upright camera.)

Environmental

Operational temperature -20 °C to +50 °C (-4 °F to +122 °F)

Weatherproofing IP68

Electrical

Input voltage 18 VAC

Power consumption Max 50 W