Datasheet

86 | Cameras, PTZ | MIC series - Ruggedized PTZ Cameras
Electromagnetic Com-
patibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations including EN50130-4 ,
EN61000-3-2:2006, EN61000-3-3:1995, and
EN55022:2006 inc AL:2007
Safety Complies with CE regulations, UL, EN, and IEC
Standards 60950-1 & 22
Weatherproofing IP68
Technical Specifications
Camera Module
Image sensor 1/4‑inch EXview CCD, WDR (36x only)
Horizontal resolution 18x module, 470 TVL NTSC/PAL typical
36x module, 530 TVL NTSC/PAL typical
Filter Automatic mechanical IR cut filter
Focus system Auto or manual
Iris Auto or manual with slow shutter integration
modes
Synchronization Internal / External (V‑Lock)
Signal/Noise ratio 50 dB or more
Back Light Compensation
(BLC)
On/Off
White balance Automatic
Automatic Gain Control
(AGC)
-3 to -28 dB, 2 dB steps
Aperture control 16 Steps
18x Optical Zoom Module
Lens F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to
F3.0
Zoom 18x optical (12x digital)
Angle of view 48° (wide) to 2.8° (tele)
Minimum illumination 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)
0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)
0.01 lux (F1.4, 1/4s NTSC, 1/3s PAL ICR on)
Shutter speed 1/1 to 1/10,000 s (22 steps) NTSC, PAL
36x Optical Zoom Module
Lens F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to
F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8° (wide) to 1.7° (tele)
Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical,
F1.6, 50IRE)
0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,
50IRE)
ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s
PAL)
Shutter speed 1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to
1/10,000 s (20 steps) PAL
Operational
Auto flip Yes
Manual flip Yes
Dynamic privacy zones Standard, 3D privacy masking with infinite
zones
Presets 64 telemetry presets utilizing resolver technol-
ogy (using FV protocol, 10 camera set-up pre-
sets to allow ANPR, color correction etc.)
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 pre-
sets
Home position Yes (preset 1 or tour)
Communication and Protocols
Communication RS485 / RS422
Control protocol Bosch or FV protocol cameras available; addi-
tional protocols supported are Pelco D, Kala-
tel, 360 Vision, American Dynamics, Panason-
ic, Molynx, VCL, and Vicon.
These can be loaded using the MIC-
USB485CVTR signal converter and Cam-set
via a PC.
Biphase control requires a Biphase to RS485
converter (MIC-BP4, available separately) in-
stalled in the MIC Series PSU to connect to Bi-
phase equipment.
Connectivity
Video Co-axial via composite cable
Telemetry Twisted pair. Simplex, half and full duplex op-
eration via composite cable
MIC Universal Camera
Setup Software Utility
(Cam-set)
Supplied with each camera, Cam-set allows di-
rect connection to a USB equipped PC via the
MIC Series PSU or over a full duplex or IP net-
work to provide access to all camera functions
and useful diagnostic tools
USB to RS485 signal con-
verter
Allows MIC Series cameras to connect to a PC
(supplied free with MIC Series 400 stainless
steel camera or available separately)
Power Via composite cable
Alarms
Alarm inputs 1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication Tamper switch (ground connection)
Mechanical
Drive unit Brushless integral pan/tilt motor drive
Pan angle 360° continuous rotation
Pan speed Up to 90° per second (variable)
Tilt angle 320°
Tilt speed 0.2° to 90° per second (variable)
Speed control Closed loop electronics
Preset accuracy Better than 0.08°
Proportional P/T to zoom Yes
Bosch Security Systems B.V. www.boschsecurity.com
1