Datasheet

ManualsBrandsBosch ManualsSecurity CamerasVEZ-211-IWCS

100

Cameras, PTZ | MIC series - Ruggedized PTZ Cameras | 89

'O'-rings, the device can operate submerged up to 1 meter

(3.3 feet) underwater by virtue of its design and

construction.*

Note *The thermal camera will show no detail if

submerged.

Integrated long-life silicone wiper and heater

Thanks to its integrated wiper and heater, the MIC

Series 412 thermal camera is able to capture the highest

possible quality image all year round, regardless of the

weather.

Host of mounting and viewing options

Faultless operation, either upright or inverted, gives the

user a host of mounting and viewing possibilities

Easy to use

Provides the same easy to use functionality of all MIC

series cameras, including the same connection cables,

brackets, control equipment, and non-IR power supply

units.

Certifications and Approvals

Electromagnetic Com-

patibility (EMC)

Complies with FCC part 15, ICES-003, and CE

regulations including EN50130-4,

EN61000-3-2:2006, EN61000-3-3:1995, and

EN55022:2006 inc AL:2007

Safety Complies with CE regulations, UL, EN, and IEC

standards 60950-1 & 22

Weatherproofing IP68

Technical Specifications

Camera Module (optical)

Image sensor 1/4‑inch EXview CCD

Horizontal resolution (WDR) 36x module, 530 TVL NTSC/PAL typi-

cal

Filter Automatic mechanical IR cut filter

Focus system Auto or manual

Iris Auto or manual with slow shutter integration

modes

Synchronization Internal / External (V‑Lock)

Signal/Noise ratio 50 dB or more

Back Light Compensation

(BLC)

On/Off

White balance Automatic

Automatic Gain Control

(AGC)

-3 to -28 dB, 2 dB steps

Aperture control 16 Steps

36x optical zoom module

Lens F=3.4 mm (WIDE) to 122.4 mm (TELE), F1.6

to F4.5

Zoom 36x optical (12x digital)

Angle of view 57.8º (WIDE end) to 1.7º (TELE end)

Minimum illumination 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical,

F1.6, 50IRE)

0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,

50IRE)

ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s

PAL)

Shutter speed 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to

1/10,000s (20 steps) PAL

Camera Module (thermal)

Lens 50 mm

Image sensor Focal Plane Array (FPA), un-cooled Vanadium

Oxide microbolometer (standard: 7.5 Hz

NTSC, 8.3 Hz PAL)

Picture elements 324(H) x 256(V)

Spatial resolution 0.760 mrad with 50 mm lens

Field of view 14°(H) x 11°(V) with 50 mm lens

Focus Factory-set at infinity focus

Detection range 780 m (2559 ft) human detection range, 2.2

km (7218 ft) object detection

Spectral response 7.5 to 13.5 μm

Thermal sensitivity 85 mK at F1.6

Features White hot, black hot, and false color modes

Operational

E-flip Yes, E-flip enables the optical camera to invert

the image

Manual flip Yes

Presets 64 telemetry presets accurate to less than

0.1°utilising resolver technology (using FV pro-

tocol, 10 camera set-up presets to allow

ANPR, color correction etc.)

Preset tours 6 tours each with up to 32 presets

Sector titles Yes (64 sectors) 20 characters per title

Preset titles 20 character caption for each of the 64 pre-

sets

Home position Yes (preset 1 or tour)

Communication and Protocols

Communication RS485 / RS422

Control protocol Bosch or FV protocol cameras available; addi-

tional protocols supported are Pelco D, Kala-

tel, Panasonic, and VCL.

These can be loaded using the MIC-

USB485CVTR signal converter and Cam-set

via a PC.

Biphase control requires a Biphase to RS485

converter (MIC-BP4, available separately) in-

stalled in the MIC Series PSU to connect to Bi-

phase equipment.