Installation manual

Wave

Back of a OneTrack system with the use of four PTZ cameras.

1. Parallel port which can be use for the alarms of the OneTrack system if an alarm

card is not present.

2. Serial port COM 1.

3. This is where you connect the OneTrack octopus cable for camera 1 to 4.

4. OneTrack Alarm output DO.

5. OneTrack Alarm input DI.

6. This screw is the ground for the OneTrack alarm card.

7. Serial port COM 2.

8. Serial port COM 4.

9. Serial port COM 3.